HTTPD Cookbook

The HTTPD Cookbook is a Library Cookbook that provides resource
primitives for use in recipes. It is designed to be an example to
reference for creating highly re-usable cross platform cookbooks.

Scope

This cookbook is concerned with
The Apache HTTP Server, particularly those
shipped with F/OSS Unix and Linux distributions. It does not address
other httpd server implementations like Lighttpd, Nginx, or IIS.

Requirements

• Chef 12.0.0 or higher
• Ruby 2.0 or higher (preferably from the Chef full-stack installer)
• Network accessible package repositories

Platform Support

The following platforms have been tested with Test Kitchen:

|----------------+-----+-----+-----|
|                | 2.0 | 2.2 | 2.4 |
|----------------+-----+-----+-----|
| debian-7       |     | X   |     |
|----------------+-----+-----+-----|
| ubuntu-10.04   |     | X   |     |
|----------------+-----+-----+-----|
| ubuntu-12.04   |     | X   |     |
|----------------+-----+-----+-----|
| ubuntu-14.04   |     |     | X   |
|----------------+-----+-----+-----|
| centos-5       |     | X   |     |
|----------------+-----+-----+-----|
| centos-6       |     | X   |     |
|----------------+-----+-----+-----|
| centos-7       |     |     | X   |
|----------------+-----+-----+-----|
| amazon         |     | X   | X   |
|----------------+-----+-----+-----|
| fedora-20      |     |     | X   |
|----------------+-----+-----+-----|
| suse-11.3      |     |     |     |
|----------------+-----+-----+-----|
| omnios-151006  |     |     |     |
|----------------+-----+-----+-----|
| smartos-14.3.0 |     |     |     |
|----------------+-----+-----+-----|

Cookbook Dependencies

• none!

Usage

Place a dependency on the httpd cookbook in your cookbook's metadata.rb
ruby
depends 'httpd', '~> 0.2'


Then, in a recipe:

httpd_service 'default' do
  action [:create, :start]
end

httpd_config 'default' do
  source 'mysite.cnf.erb'
  notifies :restart, 'httpd_service[default]'
  action :create
end

Resources Overview

httpd_service

The httpd_service does minimal configuration to get the service up
and running. Its parameters can select and tune the multi-processing
module, along with a small selection of server-wide configuration
options such as listen_ports and run_user.

The :create action handles package installation, support
directories, socket files, and other operating system level concerns.
The internal configuration file contains just enough to get the
service up and running, then loads extra configuration from a conf.d
directory. Further configurations are managed with the httpd_config resource.

The :start action starts the service on the machine using the
appropriate provider for the platform. The :start action should be
omitted when used in recipes designed to build containers.

httpd_service supports multiple Apache instances on a single
machine, enabling advanced Apache configuration in scenarios where
multiple servers need different loaded modules and global
configurations.

Examples

httpd_service 'default' do
  action :create
end

httpd_service 'instance-1' do
  listen_ports ['81', '82']
  action :create
end

httpd_service 'an websites' do
  instance_name 'bob'
  servername 'www.computers.biz'
  version '2.4'
  mpm 'event'
  threadlimit '4096'
  listen_ports ['1234']
  action :create
end

Parameters

Most of the parameters on the httpd_service resource map to their
CamelCase equivalents found at
http://httpd.apache.org/docs/2.4/mod/directives.html

• contact - The email address rendered into the main configuration file as the ServerAdmin directive.

• hostname_lookups - Enables DNS lookups on client IP addresses.
  Can be 'on' 'off' or 'double'. Defaults to 'off'.

• instance - A string name to identify the httpd_service
  instance. By convention, this will result in configuration, log, and
  support directories being created and used in the form
  '/etc/instance-name', '/var/log/instance-name', etc. If set to
  'default', the platform native defaults are used.

• keepalive - Enables HTTP persistent connections. Values can be true or false.

• keepalivetimeout - Amount of time the server will wait for
  subsequent requests on a persistent connection.

• listen_addresses - IP addresses that the server listens to.
  Defaults to ['0.0.0.0'].

• listen_ports - Ports that the server listens to. Defaults to
  ['80', '443'].

• log_level - Controls the verbosity of the ErrorLog. Defaults to 'warn'.

• maxclients - Maximum number of connections that will be processed
  simultaneously. Valid only with prefork and worker MPMs.

• maxconnectionsperchild - Limit on the number of connections that
  an individual child server will handle during its life. Valid with
  Apache 2.4 prefork, worker and event MPMs.

• maxkeepaliverequests - Number of requests allowed on a persistent
  connection. Defaults to 100.

• maxrequestsperchild - The Apache 2.2 version of
  maxconnectionsperchild. Still supported as of 2.4

• maxrequestworkers - Maximum number of connections that will be
  processed simultaneously. Valid on prefork, worker, and event MPMs.

• maxspareservers - Maximum number of idle child server processes.
  Valid only for prefork MPM.

• maxsparethreads - Maximum number of idle threads. Valid only for
  worker and event MPMs.

• minspareservers - Minimum number of idle child server processes.
  Valid only for preform MPM.

• minsparethreads - Minimum number of idle threads available to
  handle request spikes. Valid only for worker and event MPMs.

• modules - A list of initial Apache modules to be loaded inside the
  httpd_service instance. Defaults to Debian standard on 2.2 and 2.4.

• mpm - The Multi-Processing Module to use for the httpd_service
  instance. Values can be 'prefork', 'worker', and 'event'. Defaults
  to 'worker' for Apache 2.2 and 'event' for Apache 2.4.

• package_name - Name of the server package to install on the
  machine using the system package manager. Defaults to 'apache2' on
  Debian and 'httpd' on RHEL.

• run_group - System group to start the httpd_service as. Defaults
  to 'www-data' on Debian and 'apache' on RHEL.

• run_user - System user to start the httpd_service as. Defaults
  to 'www-data' on Debian and 'apache' on RHEL.

• servername - Hostname and port that the server uses to identify
  itself. Syntax: [scheme://]fully-qualified-domain-name[:port].
  Defaults to node['hostname'].

• startservers - Number of child server processes created at
  startup. Valid for prefork, worker, and event MPMs. Default value
  differs from MPM to MPM.

• threadlimit - Sets the upper limit on the configurable number of
  threads per child process. Valid on worker and event MPMs.

• threadsperchild - Number of threads created by each child process.
  Valid on worker and event MPMs.

• timeout - Amount of time the server will wait for certain events
  before failing a request. Defaults to '400'

• version - Apache software version to use. Available options are
  '2.2', and '2.4', depending on platform. Defaults to latest
  available.

httpd_module

The httpd_module resource is responsible ensuring that an Apache
module is installed on the system, as well as ensuring a load configuration
snippet is dropped off at the appropriate location.

Examples

httpd_module 'ssl' do
  action :create
end

httpd_module 'el dap' do
  module_name 'ldap'
  action :create
end

httpd_module 'auth_pgsql' do
  instance 'instance-2'
  action :create
end

Parameters

• filename - The filename of the shared object to be rendered into
  the load config snippet. This can usually be omitted, and defaults
  to a generated value looked up in an internal map.

• httpd_version - The version of the httpd_service this module is
  meant to be installed for. Useful on platforms that support multiple
  Apache versions. Defaults to the platform default.

• instance - The httpd_service name to drop the load snippet off
  for. Defaults to 'default'.

• module_name - The module name to install. Defaults to the
  httpd_module name.

• package_name - The package name the module is found in. By default,
  this is looked up in an internal map.

httpd_config

The httpd_config resource is responsible for creating and
deleting site specific configuration files on the system. There are
slight differences in the resource implementation on platforms. The
httpd_config resource is a thin wrapper around the core Chef template
resource. Instead of a path parameter, httpd_config uses the instance
parameter to calculate where the config is dropped off.

Check the Apache HTTP Server Project documentation for configuration specifics based on Apache version.

Examples

httpd_config 'mysite' do
  source 'mysite.erb'
  action :create
end

httpd_config 'computers dot biz ssl_config' do
  config_name 'ssl-config'
  httpd_instance 'computers_dot_biz'
  source 'ssl_config.erb'
  action :create
end

Parameters

• config_name - The name of the config on disk

• cookbook - The cookbook that the source template is found in.
  Defaults to the current cookbook.

• httpd_version - Used to calculate the configuration's disk path.
  Defaults to the platform's native Apache version.

• instance - The httpd_service instance the config is meant for.
  Defaults to 'default'

• source - The ERB format template source used to render the file.

• variables - A hash of variables passed to the underlying template
  resource

License & Authors

Author: Sean OMeara (sean@chef.io)

Copyright: 2008-2015, Chef Software, Inc.

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.