Adoptable Cookbooks List

Looking for a cookbook to adopt? You can now see a list of cookbooks available for adoption!
List of Adoptable Cookbooks

Supermarket Belongs to the Community

Supermarket belongs to the community. While Chef has the responsibility to keep it running and be stewards of its functionality, what it does and how it works is driven by the community. The chef/supermarket repository will continue to be where development of the Supermarket application takes place. Come be part of shaping the direction of Supermarket by opening issues and pull requests or by joining us on the Chef Mailing List.

Select Badges

Select Supported Platforms

Select Status

RSS

redisio (68) Versions 6.1.1

Installs and configures redis

Policyfile
Berkshelf
Knife
cookbook 'redisio', '= 6.1.1', :supermarket
cookbook 'redisio', '= 6.1.1'
knife supermarket install redisio
knife supermarket download redisio
README
Dependencies
Changelog
Quality -%

Redisio Cookbook

Cookbook Version
Build Status
OpenCollective
OpenCollective
License

Please read the changelog when upgrading from the 1.x series to the 2.x series

Description

Website:: https://github.com/sous-chefs/redisio

Installs and configures Redis server instances

Maintainers

This cookbook is maintained by the Sous Chefs. The Sous Chefs are a community of Chef cookbook maintainers working together to maintain important cookbooks. If you’d like to know more please visit sous-chefs.org or come chat with us on the Chef Community Slack in #sous-chefs.

Requirements

This cookbook builds redis from source or install it from packages, so it should work on any architecture for the supported distributions. Init scripts are installed into /etc/init.d/

It depends on the ulimit cookbook: https://github.com/bmhatfield/chef-ulimit and the build-essentials cookbook: https://github.com/chef-cookbooks/build-essential

Platforms

  • Debian, Ubuntu
  • CentOS, Red Hat, Fedora, Scientific Linux
  • FreeBSD

Testing

This cookbook is tested with Delivery's local mode run under Chef-DK and Test Kitchen

  • delivery local all
  • kitchen test

Tested on:

  • Centos 6
  • Centos 7
  • Debian 8
  • Fedora 28
  • Ubuntu 16.04

Usage

The redisio cookbook contains LWRP for installing, configuring and managing redis and redis_sentinel.

The install recipe can build, compile and install redis from sources or install from packages. The configure recipe will configure redis and setup service resources. These resources will be named for the port of the redis server, unless a "name" attribute was specified. Example names would be: service["redis6379"] or service["redismaster"] if the name attribute was "master".
NOTE: currently installation from source is not supported for FreeBSD

The most common use case for the redisio cookbook is to use the default recipe, followed by the enable recipe.

Another common use case is to use the default, and then call the service resources created by it from another cookbook.

It is important to note that changing the configuration options of redis does not make them take effect on the next chef run. Due to how redis works, you cannot reload a configuration without restarting the redis service. Redis does not offer a reload option, in order to have new options be used redis must be stopped and started.

You should make sure to set the ulimit for the user you want to run redis as to be higher than the max connections you allow.
NOTE: setting ulimit is not supported on FreeBSD since the ulimit cookbook doesn't support FreeBSD

The disable recipe just stops redis and removes it from run levels.

The cookbook also contains a recipe to allow for the installation of the redis ruby gem.

Redis-sentinel will write configuration and state data back into its configuration file. This creates obvious problems when that config is managed by chef. By default, this cookbook will create the config file once, and then leave a breadcrumb that will guard against the file from being updated again.

Recipes

  • configure - This recipe is used to configure redis.
  • default - This is used to install the pre-requisites for building redis, and to make the LWRPs available
  • disable - This recipe can be used to disable the redis service and remove it from runlevels
  • enable - This recipe can be used to enable the redis services and add it to runlevels
  • install - This recipe is used to install redis.
  • redis_gem - This recipe can be used to install the redis ruby gem
  • sentinel - This recipe can be used to install and configure sentinel
  • sentinel_enable - This recipe can be used to enable the sentinel service(s)
  • disable_os_default - This recipe can be used to disable the default OS redis init script

Role File Examples

Install redis and setup an instance with default settings on default port, and start the service through a role file

run_list *%w[
  recipe[redisio]
  recipe[redisio::enable]
]

default_attributes({})
Install redis with packages and setup an instance with default settings on default port, and start the service through a role file
run_list *%w[
  recipe[redisio]
  recipe[redisio::enable]
]

default_attributes({
  'redisio' => {
    package_install: true
    version:
  }
})
Install redis, give the instance a name, and use a unix socket
run_list *%w[
  recipe[redisio]
  recipe[redisio::enable]
]

default_attributes({
  'redisio' => {
    'servers' => [
      {'name' => 'master', 'port' => '6379', 'unixsocket' => '/tmp/redis.sock', 'unixsocketperm' => '755'},
    ]
  }
})
Install redis and pull the password from an encrypted data bag
run_list *%w[
  recipe[redisio]
  recipe[redisio::enable]
]

default_attributes({
  'redisio' => {
    'servers' => [
      {'data_bag_name' => 'redis', 'data_bag_item' => 'auth', 'data_bag_key' => 'password'},
    ]
  }
})
Data Bag
{
    "id": "auth",
    "password": "abcdefghijklmnopqrstuvwxyz"
}
Install redis and setup two instances on the same server, on different ports, with one slaved to the other through a role file
run_list *%w[
  recipe[redisio]
  recipe[redisio::enable]
]

default_attributes({
  'redisio' => {
    'servers' => [
      {'port' => '6379'},
      {'port' => '6380', 'slaveof' => { 'address' => '127.0.0.1', 'port' => '6379' }}
    ]
  }
})
Install redis and setup two instances, on the same server, on different ports, with the default data directory changed to /mnt/redis, and the second instance named
run_list *%w[
  recipe[redisio]
  recipe[redisio::enable]
]

default_attributes({
  'redisio' => {
    'default_settings' => {'datadir' => '/mnt/redis'},
    'servers' => [{'port' => '6379'}, {'port' => '6380', 'name' => "MyInstance"}]
  }
})
Install redis and setup three instances on the same server, changing the default data directory to /mnt/redis, each instance will use a different backup type, and one instance will use a different data dir
run_list *%w[
  recipe[redisio]
  recipe[redisio::enable]
]

default_attributes({
  'redisio' => {
    'default_settings' => { 'datadir' => '/mnt/redis/'},
    'servers' => [
      {'port' => '6379','backuptype' => 'aof'},
      {'port' => '6380','backuptype' => 'both'},
      {'port' => '6381','backuptype' => 'rdb', 'datadir' => '/mnt/redis6381'}
    ]
  }
})
Install redis 2.4.11 (lower than the default version) and turn safe install off, for the event where redis is already installed This will use the default settings. Keep in mind the redis version will not actually be updated until you restart the service (either through the LWRP or manually)
run_list *%w[
  recipe[redisio]
  recipe[redisio::enable]
]

default_attributes({
  'redisio' => {
    'safe_install' => false,
    'version'      => '2.4.11'
  }
})
Install a single redis-sentinel to listen for a master on localhost and default port number
run_list *%w[
  recipe[redisio::sentinel]
  recipe[redisio::sentinel_enable]
]

Install redis and setup two instances, on the same server, on different ports, the second instance configuration file will be overwriten by chef

run_list *%w[
  recipe[redisio]
  recipe[redisio::enable]
]

default_attributes({
  'redisio' => {
    'servers' => [{'port' => '6379'}, {'port' => '6380', 'breadcrumb' => false}]
  }
})

LWRP Examples

Instead of using my provided recipes, you can simply depend on the redisio cookbook in your metadata and use the LWRP's yourself. I will show a few examples of ways to use the LWRPS, detailed breakdown of options are below
in the resources/providers section

Install Resource

It is important to note that this call has certain expectations for example, it expects the redis package to be in the format `redis-VERSION.tar.gz'.

redisio_install "redis-installation" do
  version '2.6.9'
  download_url 'http://redis.googlecode.com/files/redis-2.6.9.tar.gz'
  safe_install false
  install_dir '/usr/local/'
end

Configure Resource

The servers resource expects an array of hashes where each hash is required to contain at a key-value pair of 'port' => 'port numbers'.

redisio_configure "redis-servers" do
  version '2.6.9'
  default_settings node['redisio']['default_settings']
  servers node['redisio']['servers']
  base_piddir node['redisio']['base_piddir']
end

Sentinel Resource

The sentinel resource installs and configures all of your redis_sentinels defined in sentinel_instances

Using the sentinel resources:

redisio_sentinel "redis-sentinels" do
  version '2.6.9'
  sentinel_defaults node['redisio']['sentinel_defaults']
  sentinels sentinel_instances
  base_piddir node['redisio']['base_piddir']
end

Attributes

Configuration options, each option corresponds to the same-named configuration option in the redis configuration file; default values listed

  • redisio['mirror'] - mirror server with path to download redis package, default is http://download.redis.io/releases/
  • redisio['base_name'] - the base name of the redis package to be downloaded (the part before the version), default is 'redis-'
  • redisio['artifact_type'] - the file extension of the package. currently only .tar.gz and .tgz are supported, default is 'tar.gz'
  • redisio['version'] - the version number of redis to install (also appended to the base_name for downloading), default is '2.8.17'
  • redisio['safe_install'] - prevents redis from installing itself if another version of redis is installed, default is true
  • redisio['base_piddir'] - This is the directory that redis pidfile directories and pidfiles will be placed in. Since redis can run as non root, it needs to have proper permissions to the directory to create its pid. Since each instance can run as a different user, these directories will all be nested inside this base one.
  • redisio['bypass_setup'] - This attribute allows users to prevent the default recipe from calling the install and configure recipes.
  • redisio['job_control'] - This deteremines what job control type will be used. Currently supports 'initd' or 'upstart' options. Defaults to 'initd'.

Default settings is a hash of default settings to be applied to to ALL instances. These can be overridden for each individual server in the servers attribute. If you are going to set logfile to a specific file, make sure to set syslog-enabled to no.

  • redisio['default_settings'] - { 'redis-option' => 'option setting' }

Available options and their defaults

'user'                    => 'redis' - the user to own the redis datadir, redis will also run under this user
'group'                   => 'redis' - the group to own the redis datadir
'permissions'             => '0644' - the unix permissions applied to the server config file
'homedir'                 => Home directory of the user. Varies on distribution, check attributes file
'shell'                   => Users shell. Varies on distribution, check attributes file
'systemuser'              => true - Sets up the instances user as a system user
'ulimit'                  => 0 - 0 is a special value causing the ulimit to be maxconnections +32.  Set to nil or false to disable setting ulimits
'configdir'               => '/etc/redis' - configuration directory
'name'                    => nil, Allows you to name the server with something other than port.  Useful if you want to use unix sockets
'tcpbacklog'              => '511',
'address'                 => nil, Can accept a single string or an array. When using an array, the FIRST value will be used by the init script for connecting to redis
'databases'               => '16',
'backuptype'              => 'rdb',
'datadir'                 => '/var/lib/redis',
'unixsocket'              => nil - The location of the unix socket to use,
'unixsocketperm'          => nil - The permissions of the unix socket,
'timeout'                 => '0',
'keepalive'               => '0',
'loglevel'                => 'notice',
'logfile'                 => nil,
'syslogenabled'           => 'yes',
'syslogfacility'          => 'local0',
'shutdown_save'           => false,
'save'                    => nil, # Defaults to ['900 1','300 10','60 10000'] inside of template.  Needed due to lack of hash subtraction
'stopwritesonbgsaveerror' => 'yes',
'rdbcompression'          => 'yes',
'rdbchecksum'             => 'yes',
'dbfilename'              => nil,
'slaveof'                 => nil,
'masterauth'              => nil,
'slaveservestaledata'     => 'yes',
'slavereadonly'           => 'yes',
'repldisklesssync'        => 'no', # Requires redis 2.8.18+
'repldisklesssyncdelay'   => '5', # Requires redis 2.8.18+
'replpingslaveperiod'     => '10',
'repltimeout'             => '60',
'repldisabletcpnodelay    => 'no',
'slavepriority'           => '100',
'requirepass'             => nil,
'rename_commands'         => nil, or a hash where each key is a redis command and the value is the command's new name.
'maxclients'              => 10000,
'maxmemory'               => nil,
'maxmemorypolicy'         => nil,
'maxmemorysamples'        => nil,
'appendfilename'          => nil,
'appendfsync'             => 'everysec',
'noappendfsynconrewrite'  => 'no',
'aofrewritepercentage'    => '100',
'aofrewriteminsize'       => '64mb',
'luatimelimit'            => '5000',
'slowloglogslowerthan'    => '10000',
'slowlogmaxlen'           => '1024',
'notifykeyspaceevents'    => '',
'hashmaxziplistentries'   => '512',
'hashmaxziplistvalue'     => '64',
'listmaxziplistentries'   => '512',
'listmaxziplistvalue'     => '64',
'setmaxintsetentries'     => '512',
'zsetmaxziplistentries'   => '128',
'zsetmaxziplistvalue'     => '64',
'hllsparsemaxbytes'       => '3000',
'activerehasing'          => 'yes',
'clientoutputbufferlimit' => [
  %w(normal 0 0 0),
  %w(slave 256mb 64mb 60),
  %w(pubsub 32mb 8mb 60)
],
'hz'                         => '10',
'aofrewriteincrementalfsync' => 'yes',
'clusterenabled'             => 'no',
'clusterconfigfile'          => nil, # Defaults to redis instance name inside of template if cluster is enabled.
'clusternodetimeout'         => 5000,
'includes'                   => nil,
'breadcrumb'                 => true # Defaults to create breadcrumb lock-file.
  • redisio['servers'] - An array where each item is a set of key value pairs for redis instance specific settings. The only required option is 'port'. These settings will override the options in 'default_settings', if it is left nil it will default to [{'port' => '6379'}]. If set to [] (empty array), no instances will be created.

The redis_gem recipe will also allow you to install the redis ruby gem, these are attributes related to that, and are in the redis_gem attributes file.

  • redisio['gem']['name'] - the name of the gem to install, defaults to 'redis'
  • redisio['gem']['version'] - the version of the gem to install. if it is nil, the latest available version will be installed.

The sentinel recipe's use their own attribute file.

  • redisio['sentinel_defaults'] - { 'sentinel-option' => 'option setting' }
'user'                    => 'redis',
'configdir'               => '/etc/redis',
'sentinel_bind'           => nil,
'sentinel_port'           => 26379,
'monitor'                 => nil,
'down-after-milliseconds' => 30000,
'can-failover'            => 'yes',
'parallel-syncs'          => 1,
'failover-timeout'        => 900000,
'loglevel'                => 'notice',
'logfile'                 => nil,
'syslogenabled'           => 'yes',
'syslogfacility'          => 'local0',
'quorum_count'            => 2,
'protected-mode'          => nil,
  • redisio['redisio']['sentinel']['manage_config'] - Should the cookbook manage the redis and redis sentinel config files. This is best set to false when using redis_sentinel as it will write state into both configuration files.

  • redisio['redisio']['sentinels'] - Array of sentinels to configure on the node. These settings will override the options in 'sentinel_defaults', if it is left nil it will default to [{'port' => '26379', 'name' => 'mycluster', 'master_ip' => '127.0.0.1', 'master_port' => 6379}]. If set to [] (empty array), no instances will be created.

You may also pass an array of masters to monitor like so:

[{
  'sentinel_port' => '26379',
  'name' => 'mycluster_sentinel',
  'masters' => [
    { 'master_name' => 'master6379', 'master_ip' => '127.0.0.1', 'master_port' => 6379 },
    { 'master_name' => 'master6380', 'master_ip' => '127.0.0.1', 'master_port' => 6380 }
  ]

}]

Resources/Providers

install

Actions:

  • run - perform the install (default)
  • nothing - do nothing

Attribute Parameters

  • version - the version of redis to download / install
  • download_url - the URL plus filename of the redis package to install
  • download_dir - the directory to store the downloaded package
  • artifact_type - the file extension of the package
  • base_name - the name of the package minus the extension and version number
  • safe_install - a true or false value which determines if a version of redis will be installed if one already exists, defaults to true

This resource expects the following naming conventions:

package file should be in the format base_nameVersion_number.artifact_type

package file after extraction should be inside of the directory base_nameVersion_number

install "redis" do
  action [:run,:nothing]
end

configure

Actions:

  • run - perform the configure (default)
  • nothing - do nothing

Attribute Parameters

  • version - the version of redis to download / install
  • base_piddir - directory where pid files will be created
  • user - the user to run redis as, and to own the redis files
  • group - the group to own the redis files
  • default_settings - a hash of the default redis server settings
  • servers - an array of hashes containing server configurations overrides (port is the only required)
configure "redis" do
  action [:run,:nothing]
end

Contributors

This project exists thanks to all the people who contribute.

Backers

Thank you to all our backers!

https://opencollective.com/sous-chefs#backers

Sponsors

Support this project by becoming a sponsor. Your logo will show up here with a link to your website.

https://opencollective.com/sous-chefs/sponsor/0/website
https://opencollective.com/sous-chefs/sponsor/1/website
https://opencollective.com/sous-chefs/sponsor/2/website
https://opencollective.com/sous-chefs/sponsor/3/website
https://opencollective.com/sous-chefs/sponsor/4/website
https://opencollective.com/sous-chefs/sponsor/5/website
https://opencollective.com/sous-chefs/sponsor/6/website
https://opencollective.com/sous-chefs/sponsor/7/website
https://opencollective.com/sous-chefs/sponsor/8/website
https://opencollective.com/sous-chefs/sponsor/9/website

Dependent cookbooks

selinux >= 0.0.0

Contingent cookbooks

abiquo Applicable Versions
cloudless-box Applicable Versions
fieri Applicable Versions
gitlab Applicable Versions
gitlab-server Applicable Versions
gitlab-shell Applicable Versions
gitlabhq Applicable Versions
guardian Applicable Versions
magentostack Applicable Versions
nodestack Applicable Versions
redis-multi Applicable Versions
redis-omnibus Applicable Versions
ruby-env-cookbook Applicable Versions
sensu Applicable Versions
supermarket Applicable Versions
thumbor Applicable Versions
thumbor_ng Applicable Versions
tyk Applicable Versions
webapp Applicable Versions
zenoss Applicable Versions

redisio

This file is used to list changes made in each version of the redisio cookbook.

6.1.1 - 2022-02-03

  • Remove delivery and move to calling RSpec directly via a reusable workflow

6.1.0 - 2021-09-15

  • Add protected mode to sentinel configuration file

6.0.0 - 2021-09-09

  • Set unified_mode true for Chef 17+ support
  • Require Chef 15.3+ for unified_mode
  • Require Chef 16 for user_ulimit resource
  • Remove dependency on the ulimit cookbook
  • Switch from using the selinux_policy cookbook to the selinux cookbook
    • The selinux_policy cookbook is now deprecated. The resources have been moved to the selinux cookbook

5.0.0 - 2021-09-08

  • resolved cookstyle error: attributes/default.rb:74:40 refactor: Chef/Modernize/UseChefLanguageSystemdHelper

4.3.2 - 2021-08-30

  • Standardise files with files in sous-chefs/repo-management

4.3.1 - 2021-06-01

  • Standardise files with files in sous-chefs/repo-management

4.3.0 - 2021-05-19

  • Fix disable recipe service naming for systemd

4.2.0 (2020-09-14)

  • New server option 'permissions' to override default (0644) unix permissions on config file

4.1.2 (2020-09-11)

  • Pull the disable_os_default recipe from the default one

4.1.1 (2020-08-14)

  • Properly perform version check when needed in redis.conf template

4.1.0 (2020-05-05)

  • Simplify platform check logic
  • Remove the deprecated ChefSpec coverage report
  • Migrate to actions for testing

4.0.0 (2019-09-19)

  • Enable testing in CircleCI
  • Removed build essentials cookbook dependancy
  • Minimum Chef is now 14
  • Removed tests for Debian 8
  • Added support for chef 15
  • configure recipe now sets ['redisio']['servers'] using override instead of normal in line with new chef best practices

3.0.0 (2018-11-27)

  • This cookbook is now maintained by the Sous Chefs. If you're interested in helping with maintenance or learning more check out https://sous-chefs.org/ Thank you Brian Bianco for the work you've done over the years on this cookbook. We'll be sure to take good care of it.
  • This cookbook now requires Chef 13 or later
  • Incompatibilities with the latest selinux_policy cookbook have been resolved by using Chef's built in selinux helpers
  • All Chefstyle warnings have been resolved
  • Contributing.md and CODE_OF_CONDUCT.md files have been added
  • The build_essential resource is now directly used so that the built in resource in Chef 14+ can be used. This increases the required build-essential cookbook to 5.0+
  • Duplicate dependencies in the Berksfile have been removed
  • The chefignore file has been updated to prevent more unnecessary files from being uploaded to the chef server
  • Data bags are now loaded with the data_bag_item helper instead of Chef::EncryptedDataBagItem.load directly
  • Testing has been updated to use Delivery Local Mode which is built into ChefDK. The legacy Rakefile, Vagrantfile, Thorfile, and Cheffile have been removed
  • Platforms in Test Kitchen configurations have been updated and dokken images are now used in dokken

2.7.2 (2018-09-30)

  • fixes sentinal cluster init script by providing missing LSB statements ([#374])

2.7.1 (2018-03-30)

  • fixes sentinal config where announce-ip was being given the value of announce-port improperly ([#354])

2.7.0 (2018-03-28)

  • enables diskless replication configuration for versions ~> 2.6 || ~> 3.0 #340
  • adds chef 13 compatability #350

2.6.1 (2017-05-10)

  • Restrict aof-load-truncated to redis 3+ (#343)
  • Fix Redis 2.4.x config (#344)

2.6.0 (2017-05-09)

  • Update 'bind' config comments (#293)
  • Add disable_os_default recipe (#224)
  • Use the config's ulimits if set and is > max_clients (#234)
  • Add Travis config (#299)
  • Fix test failures (FoodCritic and Rubocop) (#298)
  • Fix TravisCI builds (#300)
  • Add repl-backlog-size, repl-backlog-ttl, and aof-load-truncated options (#278)
  • Add sentinel_bind to bind sentinel to different IPs (#306)
  • Cleanup deprecation warnings (#301)
  • Fix version detection with epoch version numbers from deb/ubuntu (#294)
  • Restrict VM redis config to <= 2.4 (#322)
  • Rename_commands should be checked for nil before empty (#311)
  • Fixup foodcritic, rubocop, and kitchen testing (#324)
    • Note: this drops support for Chef < 11
  • Add min-slaves redis options (#313)
  • Allow /etc/init start after sigterm from system or user (#310)
  • Check user existence with Etc, not ohai node attributes (#303)
  • Various systemd-related improvements (#302)
  • Update serverspec testing with correct OS's for systemd (#329)
  • Add kitchen-dokken testing to Travis (#330)
  • Add fedora-25 to kitchen testing and clean up kitchen config (#331)
  • Fix systemd paths for sentinel service (#332)
  • Add redis-package and sentinel to Travis kitchen verify (#334)
  • Add breadcrumb-file creation condition as attribute (#268)
  • Fix cluster options in README (#333)
  • Fix systemd loader to use descriptors instead of max_clients+32 (#338)
  • Add SELinux support (#305)
  • Make source of redis.conf template configurable (#341)
  • Support sentinel notification-script and client-reconfig-script (#342)

2.5.0 (2016-09-15)

  • Ubuntu 14 added as tested platform. (#264)
  • FreeBSD-10.3 support added. (#279)
    • installation from source is not supported
    • setting ulimits is not supported
  • Encrypted databag support added. (#228)
  • Systemd nofile limit fixed. (#228)
  • Announce-ip and announce-port directives for sentinel added. (#228)
  • Disabling safe_install in the install recipe allowed. (#284)
  • Protected-mode added as optional (#275, #289)
  • Fixes nil exception when installing sentinel on non-debian and non-rhel platforms (#288)

2.4.2 (2016-04-08)

  • Created a 2.4.1 tag but somehow the metadata file wasn't updated. Instead of deleting a pushed tag, creating a new tag and updating metdatafile. Aside from the version number, this is an identical release to 2.4.1

2.4.1

  • Increases default clusternodetimeout value from 5 to 5000
  • Allows you to set version for package based install
  • Sets UID of redis data directory if it is present
  • Install resource should now only notify when an installation actually occurs
  • Adds config options
    • tcpbacklog
    • rdbcompression
    • rdbchecksum
    • dbfilename
    • slavereadyonly
    • repldisabletcpnodelay
    • slavepriority
    • listmaxziplistentries
    • listmaxziplistvalue
    • hllsparsemaxbytes
  • Add CentOS 7 support with systemd configs
  • Fixes bug in ulimit resource guard
  • Fixes bug in sentinel required parameters sanity check
  • Adds --no-same-owner to untar command during install to fix NFS related issues
  • Adds support for rename_commands config option
  • Adds option to stop chef from managing sentinel configs after writing once
  • Adds config option rename_commands
  • Allow instance 'save' to be string or array
  • Adds sources_url and issues_url with guards to be Chef 12 compatible
  • Bumps Redis source version to 2.8.20
  • Fixes cluster settings with wrong attribute names
  • Monitor multiple masters with sentinel
    • Add support in sentinel resource for an array of masters to monitor, with backwards compatibility for the older attributes, fixes #73. Replaces #87.
    • Introduce a test-kitchen test for sentinel watching multiple masters.
    • Incidentally, fixes #193 as well, since it adds a master name attribute for each master.
  • Fixes path for pidfile in sentinel init script
  • Additional error checking and backwards compatibility for sentinel attribute keys

2.3.0 (2015-04-08)

  • Add support for installing by distribution package for CentOS (#180)
  • Add conditionals to check for redis 3 that was released recently (#183)
  • Prevent usermod: user redis is currently logged in (#176)
  • Use correct sentinel port in default sentinel instance (#157)
  • Sentinel instances attribute (node['redisio']['sentinels']) should behave like Redis instances attribute (#160)
  • Add Rakefile and unit tests for verifying issues fixed are actually resolved (#158)
  • Fix serverspec tests to properly use sysv-init scripts on systemd distributions (#185)
  • Update documentation to reflect correct current redis version used for source installs (#151)
  • Update documentation to indicate that ulimit and build-essential are both dependencies (#165)
  • Update documentation to reflect that uninstall recipe is no longer available
  • Update documentation to reflect correct mirror in README.md, change was from 2.1.0 (#175)
  • Update documentation to reflect that cookbook uses node['redisio'], not node['redis'] (#174)
  • Markdown formatting improvements in the README.md (#168, #172)

2.2.4 (2014-10-04)

  • Updates installed version of redis to the latest stable (2.8.17)
  • Fixes backwards compatability bug with older version of redis (namely 2.6.x series) related to keyspaces

2.2.3 (2014-08-25)

  • Bug Fix: Repackages the chef supermarket releaes with gnutar instead of BSD tar

2.2.2 (2014-08-22)

  • Please refer to changelog for 2.0.0.
    • If moving from 1.7.x this release has many breaking changes. You will likely need to update your wrapper cookbook or role.
  • Added test-kitchen and serverspec coverage for both redis and redis_sentinel
  • Added cookbook testing information to readme
  • Bug fix for a fix that was introduced to resolve foodcritic rule fc002
  • Fix init script to use su instead of sudo for ubuntu debian fedora
  • Fix sentinel_enable recipe to properly run if using default attributes
  • Save property for redis config now is defined by using an array
  • Small changes to default configuration options to bring in line with redis defaults.
  • Added options for the following
    • tcp-keepalive

2.2.1

  • Allow sentinel to control both redis and redis-sentinel configs depending on attribute redisio.sentinel.manage_config state.

2.2.0

  • Adds behavior to allow the cookbook to NOT manage the redis config files as redis itself will write to them now if you are using sentinel

2.1.0

  • Adds options for the following
    • lua-time-limit
    • slowlog-logs-slower-than
    • slowlog-max-len
    • notify-keyspace-events
    • client-output-buffer-limit
    • hz
    • aof-rewrite-incremental-fsync
  • Removes the uninstall recipe and resource.
  • Adds the ability to skip the default recipe calling install and configure by setting redisio bypass_setup attribute to true
  • Adds support for redis sentinel [Thanks to rcleere, Ryan Walker]
  • Splits up the install resource into separate install and configure resources [Thanks to rcleere]
  • By default now calls _install_prereqs, install, and configure in the default recipe.
  • Changes default version of redis to install to 2.8.5
  • Now depends on the build-essential cookbook.
  • Fixes issue #76 - Default settings save as empty string breaks install
  • Switches mirror server from googlefiles to redis.io. If you are using version of redis before 2.6.16 you will need to override the mirror server attribute to use the old site with archived versions.
  • Adds a Vagrant file!
  • maxmemory will be rounded when calculated as a percentage
  • Add stop-writes-on-bgsave-error config option
  • Changes default log level from verbose to notice
  • Adds configuration options for ziplists and active rehashing
  • Adds support for passing the address attribute as an array. This is to support the redis 2.8 series which allows binding to multiple addresses
  • Fixes a bug where multiple redis instances were using the same swapfile (only for version of redis 2.4 and below)
  • Changes the job_control per instance attribute to a global one.
  • Adds a status command to the init.d script, uses this in the initd based service for checking status

2.0.0

! THIS RELEASE HAS MANY BREAKING CHANGES !
! Your old role file will most likely not work !

  • Supports redis 2.8 and its use of the empty string for stdout in the logfile option
  • Allows the user to specify required_start and required_start when using the init scripts
  • Warns a user if they have syslogenabled set to yes and also have logfile set

1.7.1 (2014-02-10)

  • Bumps default version of redis to 2.6.17
  • Changes the redis download mirror to redis.io
  • Fixes #76 - Default settings save as empty string breaks install. [Thanks to astlock]
  • Fixes bug with nil file resource for logfile. [Thanks to chrismoos]

1.7.0 (2013-07-25)

  • Adds support for address attribute as an array or string. This is to support the feature that will be introduced in redis 2.8

1.6.0 (2013-06-27)

  • Fixes a bug when using a percentage for max memory. [Thanks to organicveggie]
  • Allows installation of redis into custom directory. [Thanks to organicveggie, rcleere]
  • Bumps the default installed version of redis to the new stable, 2.6.14

1.5.0 (2013-03-30)

  • Forces maxmemory to a string inside of install provider so it will not explode if you pass in an int. [Thanks to sprack]
  • Strips leading directory from downloaded tarball, and extracts into a newly created directory. This allows more versatility for where the package can be installed from (Github / BitBucket) [Thanks to dim]
  • Adds options for Redis Cluster [Thanks to jrallison]
  • Adds a call to ulimit into the init script, it was not honoring the limits set by the ulimit cookbook for some users. [Thanks to mike-yesware]

1.4.1 (2013-02-27)

  • Removes left over debugging statement

1.4.0 (2013-02-27)

  • ACTUALLY fixes the use of upstart and redis. Redis no longer daemonizes itself when using job_control type upstart and allows upstart to handle this
  • Adds dependency on the ulimit cookbook and allows you to set the ulimits for the redis instance users.
  • Adds associated node attribute for the ulimit. It defaults to the special value 0, which causes the cookbook to use maxclients + 32. 32 is the number of file descriptors redis needs itself
  • You can disable the use of the ulimits by setting the node attribute for it to "false" or "nil"
  • Comments out the start on by default in the upstart script. This will get uncommented by the upstart provider when the :enable action is called on it

1.3.2 (2013-02-26)

  • Changes calls to Chef::ShellOut to Mixlib::ShellOut

1.3.1 (2013-02-26)

  • Fixes bug in upstart script to create pid directory if it does not exist

1.3.0 (2013-02-20)

  • Adds upstart support. This was a much requested feature.
  • Fixes bug in uninstall resource that would have prevented it from uninstalling named servers.
  • Reworks the init script to take into account the IP redis is listening on, and if it is listening on a socket.
  • Adds an attribute called "shutdown_save" which will explicitly call save on redis shutdown
  • Updates the README.md with a shorter and hopefully equally as useful usage section
  • maxmemory attribute now allows the use of percentages. You must include a % sign after the value.
  • Bumps default version of redis to install to the current stable, 2.6.10

1.2.0 (2013-02-06)

  • Fixes bug related to where the template source resides when using the LWRP outside of the redisio cookbook
  • Fixes bug where the version method was not properly parsing version strings in redis 2.6.x, as the version string from redis-server -v changed
  • Fixes bug in default attributes for fedora default redis data directory
  • Now uses chefs service resource for each redis instance instead of using a custom redisio_service resource. This cleans up many issues, including a lack of updated_by_last_action
  • The use of the redisio_service resource is deprecated. Use the redis port_number instead.
  • The default version of redis has been bumped to the current stable, which is 2.6.9
  • Adds metadata.json to the gitignore file so that the cookbook can be submoduled.
  • Adds the ability to handle non standard bind address in the init scripts stop command
  • Adds attributes to allow redis to listen on a socket
  • Adds an attribute to allow redis service accounts to be created as system users, defaults this to true
  • Adds a per server "name" attribute that allows a server to use that instead of the port for its configuration files, service resource, and init script.
  • Shifts the responsbility for handling the case of default redis instances into the install recipe due to the behavior of arrays and deep merge

1.1.0 (2012-08-21)

! Warning breaking change !: The redis pidfile directory by default has changed, if you do not STOP redis before upgrading to the new version
of this cookbook, it will not be able to stop your instance properly via the redis service provider, or the init script.
If this happens to you, you can always log into the server and manually send a SIGTERM to redis

  • Changed the init script to run redis as the specified redis user
  • Updated the default version of redis to 2.4.16
  • Setup a new directory structure for redis pid files. The install provider will now nest its pid directories in base_piddir/port number/redis_port.pid.
  • Added a RedisioHelper module in libraries. The recipe_eval method inside is used to wrap nested resources to allow for the proper resource update propigation. The install provider uses this.
  • The init script now properly respects the configdir attribute
  • Changed the redis data directories to be 775 instead of 755 (this allows multiple instances with different owners to write their data to the same shared dir so long as they are in a common group)
  • Changed default for maxclients to be 10000 instead of 0. This is to account for the fact that maxclients no longer supports 0 as 'unlimited' in the 2.6 series
  • Added logic to replace hash-max-ziplist-entries, hash-max-ziplist-value with hash-max-zipmap-entires, hash-max-zipmap-value when using 2.6 series
  • Added the ability to log to any file, not just syslog. Please do make sure after you set your file with the logfile attribute you also set syslogenabled to 'no'

1.0.3 (2012-05-02)

  • Added changelog.md
  • Added a bunch more configuration options that were left out (default values left as they were before):

    • databases
    • slaveservestaledata
    • replpingslaveperiod
    • repltimeout
    • maxmemorysamples
    • noappendfsynconwrite
    • aofrewritepercentage
    • aofrewriteminsize

    It is worth nothing that since there is a configurable option for conf include files, and the fact that redis uses the most recently read configuration option... even if a new option where to show up, or and old one was not included they could be added using that pattern.

1.0.2 (2012-04-25)

  • Merged in pull request from meskyanichi which improved the README.md and added a .gitignore
  • Added a "safe_install" node attribute which will prevent redis from installing anything if it exists already. Defaults to true.
  • Addedd a "redis_gem" recipe which will install the redis gem from ruby gems, added associated attributes. See README for me

1.0.1 (2012-04-08)

  • Added some prequisite checks for RHEL based distributions
  • Minor typos and formatting fixes in metadata.rb and README.md

1.0.0 (2012-04-08)

Initial Release

No quality metric results found