Adoptable Cookbooks List

Looking for a cookbook to adopt? You can now see a list of cookbooks available for adoption!
List of Adoptable Cookbooks

Supermarket Belongs to the Community

Supermarket belongs to the community. While Chef has the responsibility to keep it running and be stewards of its functionality, what it does and how it works is driven by the community. The chef/supermarket repository will continue to be where development of the Supermarket application takes place. Come be part of shaping the direction of Supermarket by opening issues and pull requests or by joining us on the Chef Mailing List.

Select Badges

Select Supported Platforms

Select Status

RSS

f5 (30) Versions 0.4.4

Resources for managing an F5 BigIP load balancer

Policyfile
Berkshelf
Knife
cookbook 'f5', '= 0.4.4', :supermarket
cookbook 'f5', '= 0.4.4'
knife supermarket install f5
knife supermarket download f5
README
Dependencies
Changelog
Quality 33%

f5-cookbook

A set of resources for managing F5 load balancers. Currently a WIP, but it will create VIPs and pools, and add nodes to pools

Requirements

Platforms

  • RHEL/Fedora and derivatives
  • Debian/Ubuntu and derivatives
  • Windows [2012.R2, 2016]

Chef

  • Chef 12.7+

Cookbooks

  • none

Attributes

  • node['f5']['gem_version'] - Sets the version of the gem that will be installed via the resource
  • node['f5']['enabled_status'] - Can take one of three values:
    • :manual - the default, the f5_pool resource does not touch the node's enabled status on load balancer, allowing it to be managed manually on the load balancer
    • :disabled - if a node does not exist or does exist but is enabled, the load balancer will be asked to disable the node
    • :enabled - if a node does not exist or does exist but is disabled, the load balancer will be asked to enable the node

Usage

Your node will also need access to the credentials for the load balancer either in the attributes or a data bag:

If you're using a data bag, call it f5 and the default item is called default.

$ knife data bag show f5 default
Unencrypted data bag detected, ignoring any provided secret options.
host:     lb1.example.com
id:       default
password: TopSecret
username: chef-api

Or, if no data bag is found, attributes are used

default[:f5][:credentials][:default] = {
  host: "lb1.example.com",
  username: "chef-api",
  password: "TopSecret"
}

Resources

In an application's recipe:

# Creates the pool if missing and adds this node to the pool
# (currently using node.ipaddress and node.fqdn for the node)
f5_pool 'mypool' do
  host 'value'
  port 'value'
  lb_method 'method' # LB_METHOD_ROUND_ROBIN default
end

# Creates the VIP if missing
f5_vip 'myvip' do
  address 'vipaddress' # IPv4 or FQDN, see below
  port 'vipport'
  protocol 'protocol' # TCP default
  pool 'mypool'

  # this is optional; defaults to :manual so won't touch your setting
  #                   unless you specify one of the valid options.
  snat_pool :automap

  # this is optional; defaults to :manual so won't touch your setting
  #                   unless you specify one of the valid options.
  #                   :none disables the firewall_policy,
  #                   anything else is a named firewall_policy
  enforced_firewall_policy

  # this is optional; defaults to :manual so won't touch your setting
  #                   unless you specify one of the valid options.
  #                   :none disables the firewall_policy,
  #                   anything else is a named firewall_policy
  staged_firewall_policy

  # this is optional; If this VIP has IRules on the F5, this resource
  #                   will remove them and insert exactly what is specified
  #                   here. The attribute takes in an array of irules. The order 
  #                   describes the priority of the irules.
  #                   When changing priority of IRules, be aware that the F5
  #                   doesn't provide an API for re-ordering associations therefore
  #                   the re-ordered rules must be deleted then re-added in the correct
  #                   order.
  irules %w(test-irule test-irule-2)

  # this is optional; Sets the http profile of the VIP. The default value is `nil`.
  #                   When value is `nil` it will not modify the http profile. Setting  
  #                   to `:none` will remove the http profile. Otherwise
  #                   it sets the http profile. Note, the HTTP Profile must already
  #                   exist on the f5.
  http_profile :none
end

# Create a F5 monitor template
f5_monitor 'test-monitor' do 
  # Required properties
  template_type 'TTYPE_HTTP' # F5 template type
  parent_template 'http'
  interval 5 # frequency to check in seconds
  timeout 3 # seconds to respond

  #optional properties (default values are shown)
  dest_ip '0.0.0.0' # tells f5 what address to test. Default indicates to test the node the monitor is applied to
  dest_port '0' # tells f5 which port to test; Default indicates to test the port the monitor is applied to
  read_only false # specifies if this template is read only
  is_directly_usable true # specifies if the template can be directly used
end

# Create an F5 IRule
f5_irule 'test-irule' do 
  # IRule definition
  definition <<-EOL
# For hosts that serve both http but attached to http and https vips, 
# this lets them know if the request
# originally came in on https
when HTTP_REQUEST {
  HTTP::header insert HTTPS true
}
  EOL
end

See the documentation for LocalLB::LBMethod and protocol.

Using DNS for the name

This is an experimental feature. Some of the corner cases might not work :)

If you pass a FQDN to the VIP's address, this resource will attempt to resolve the name through DNS. If a match is found, the first address returned is used for the VIP. If no match is found, the resource will not be processed.

f5_pool Actions

f5_pool's default action is :create which manages the pool and its settings, as well as the node and its settings. If the pool has already been created outside of this recipe and the desired behavior is for chef to fail when the pool doesn't exist use the :add action.

The :add action will only ensure the node is in the pool and configured correctly, but will not modify the pool. Pool-related attributes are ignored.

Manging node enabled status through node attributes

The f5_pool resource exposes an enabled_status property which allows you to explicitly take control of a node's enabled/disabled status within a pool via chef recipes and attributes.

f5_pool 'mypool' do
  host 'value'
  port 'value'
  enabled_status :disabled
end

Though more commonly this is delegated to an attribute, which is the default behavior when this property is not specified explicitly:

f5_pool 'mypool' do
  host 'value'
  port 'value'
end

is equivalent to

f5_pool 'mypool' do
  host 'value'
  port 'value'
  enabled_status node['f5']['enabled_status']
end

and node['f5']['enabled_status'] defaults to :manual so it won't touch the enabled status of your node in the pool unless you explicitly ask it to.

Managing virtual server client and server ssl profiles

The f5_vip resource exposes a pair or properties which allow you to add client and server SSL profiles to a virtual server.

f5_vip 'myvip' do
  address 'vipaddress'
  port 'vipport'
  protocol 'protocol' # TCP default
  pool 'mypool'
  client_ssl_profile 'client.cert'
  server_ssl_profile 'server.cert'
end

These two properties are optional and only take effect if they are specified.

They will converge to ensure that profile is applied to the given vip, but there is currently no option to remove an SSL profile.

Chef-provisioning

The f5_pool and f5_vip resources can be used as-is in a chef-provisioning environment. Options exists for some resources that are especially catered to chef-provisioning.

f5_pool

If the host attribute on the f5_pool resource is excluded the resource will not attempt to add a node but instead simply manage the pool itself.

Writing specs for vip and pool resources

This coobkook provides custom chefspec matchers so you can write specs like this:

require 'chefspec'

describe 'example::default' do
  let(:chef_run) { ChefSpec::SoloRunner.new(platform: 'ubuntu', version: '16.04').converge(described_recipe) }

  it 'creates the example_com pool (if needed) and adds this node to it' do
    expect(chef_run).to create_f5_pool('example_com').with(
      ip: '10.0.0.2',
      host: 'examplenode01.internaldomain.com',
      port: 80,
      monitor: 'test-monitor'
    )
  end

  it 'creates the example.com vip' do
    expect(chef_run).to create_f5_vip('example.com').with(
      address: '86.75.30.9',
      port: '80',
      protocol: 'PROTOCOL_TCP',
      pool: 'reallybasic'
    )
  end
end

NOTE: these matches verify only the presence (or absence via expect(chef_run).to_not) of a resource and the configuration of its properties according to hash passed to the optional with method.

The matchers cannot be used to validate whether convergence of an f5_pool or f5_vip resource took place.

NOTE: Due to this issue you can't test multiple calls to a resource in chefspec if the resource name is the same.
All resources have an optional <RESOURCE_NAME>_name attribute that you can use to override the chef resource's name. E.g.

f5_pool 'pool_name_create' do 
  pool_name 'pool_name'
  monitor 'tcp'
end

f5_pool 'pool_name_add_node1' do 
  pool_name 'pool_name'
  host 'node1'
  ip '1.2.3.4'
  port 443
end

f5_pool 'pool_name_add_node2' do 
  pool_name 'pool_name'
  host 'node2'
  ip '1.2.3.5'
  port 443
end

In the above example, if pool_name wasn't specified then the resource name would have to be pool_name for each call to f5_pool. This would work as expected in chef but chefspec would only register the
last invocation of f5_pool. By using the pool_name resource the chef resource can be uniquely named and therefore tested.

Testing this cookbook

Run bundle exec rake test to run the chefspec tests.

bundle exec rake guard starts a guard listener which watches files and auto-runs rspec to provide faster feedback

bundle exec rake lint will run rubocop

License and Authors

Author:: Sean Walberg (sean@ertw.com)

Dependent cookbooks

This cookbook has no specified dependencies.

Contingent cookbooks

There are no cookbooks that are contingent upon this one.

0.2.2

Bugfix for the last version

0.2.1

Supporting credentials in a databag

0.2.0

Still rough around the edges and nowhere near feature complete, but
this cookbook will create the pool and VIP and add the node as a member

0.1.0

Initial release of f5

Collaborator Number Metric
            

0.4.4 passed this metric

Contributing File Metric
            

0.4.4 failed this metric

Failure: To pass this metric, your cookbook metadata must include a source url, the source url must be in the form of https://github.com/user/repo, and your repo must contain a CONTRIBUTING.md file

Foodcritic Metric
            

0.4.4 failed this metric

FC108: Resource should not define a property named 'name': f5/resources/irule.rb:1
FC108: Resource should not define a property named 'name': f5/resources/monitor.rb:1
Run with Foodcritic Version 14.0.0 with tags metadata,correctness ~FC031 ~FC045 and failure tags any

No Binaries Metric
            

0.4.4 passed this metric

Testing File Metric
            

0.4.4 failed this metric

Failure: To pass this metric, your cookbook metadata must include a source url, the source url must be in the form of https://github.com/user/repo, and your repo must contain a TESTING.md file

Version Tag Metric
            

0.4.4 failed this metric

Failure: To pass this metric, your cookbook metadata must include a source url, the source url must be in the form of https://github.com/user/repo, and your repo must include a tag that matches this cookbook version number