Adoptable Cookbooks List

Looking for a cookbook to adopt? You can now see a list of cookbooks available for adoption!
List of Adoptable Cookbooks

Supermarket Belongs to the Community

Supermarket belongs to the community. While Chef has the responsibility to keep it running and be stewards of its functionality, what it does and how it works is driven by the community. The chef/supermarket repository will continue to be where development of the Supermarket application takes place. Come be part of shaping the direction of Supermarket by opening issues and pull requests or by joining us on the Chef Mailing List.

Select Badges

Select Supported Platforms

Select Status

RSS

sk_ruby (4) Versions 2.0.15

LWRPs for installing source-built rubies. Automatically uploads built s3 binaries. Subsequent runs will download instead of rebuilding.

Policyfile
Berkshelf
Knife
cookbook 'sk_ruby', '= 2.0.15', :supermarket
cookbook 'sk_ruby', '= 2.0.15'
knife supermarket install sk_ruby
knife supermarket download sk_ruby
README
Dependencies
Quality 0%

sk_ruby Cookbook

Cookbook Version
Build Status

Audience (AKA Why Another Ruby Cookbook?)

  • Rebuilding ruby from source on every install is stupid (build once then install binaries)
  • Most ruby versions managers have too much magic sauce
  • I just want to install an RPM/deb into /opt
  • I might want some symlinks in /usr/local/bin to the latest version

Description

LWRP for source builds of ruby binaries. Since source building on every chef-client run sucks, I added the ability to download a
cached pre-build package from S3 so that you only have to download it once. Since uploading the package to S3 was fussy and manual
I automated that problem away so that the first time one of your servers builds the new package it uploads it to S3 so that the other
servers can download it.

This does not use rbenv/rvm/chruby. It just builds a package and install it into /opt. There is a helper RPM to wire up all the
binaries into /usr/bin if you want the package to replace the system ruby packages (otherwise you probably want to either be
specific with the full path to ruby in your shebangs, or else you want to get the /opt installed ruby into the PATH where it
needs to be used).

Supports

Tested:

  • Ubuntu 10.04-13.10
  • RHEL/CentOS/Oracle/Scientific 5.x/6.x
  • Debian 7.0
  • Fedora 19

Probably Works:

  • LinuxMint
  • Amazon 2012.09 (and probably others)
  • Debian 6.0
  • Fedora 18-20?

Supported Ruby Builds:

Tested:

  • Ruby 1.8.7-p374
  • Ruby 1.9.3-p484
  • Ruby 2.0.0-p353
  • Ruby 2.1.0

Other versions should work, nothing before 1.8.7 will be supported.

Requirements

  • Omnibus Chef >= 11.6.0

Cookbook Dependencies

  • build-essential
  • apt
  • sk_s3_file

Resources/Providers

sk_ruby

This resource source compiles ruby and uses s3 as a cache for the deb/rpm artifact that it produces.

Example

This will compile ruby-2.1.0 with rubygems 2.2.1 and the listed gems pre-installed. It will use the "mybucket" s3 bucket to
store and retrieve the compiled rubygems package. The resultant package will install in /opt/ruby-2.1.0/bin/ruby. I've pulled
the AWS creds out of an encrypted data bag as an example of best practices, you don't have to use one.

my_gems = %w{ bundler rake fpm pry thor puma unicorn thin webrick }

creds = Chef::EncryptedDataBagItem.load("encrypted", "creds")

sk_ruby "2.1.0" do
  rubygems "2.2.1"
  gems my_gems
  cache_uri_base "http://mybucket.s3.amazonaws.com/ruby"
  pkg_version "0.0.1"
  aws_access_key_id creds["ec2_access_key"]
  aws_secret_access_key creds["ec2_secret_key"]
  aws_bucket "mybucket"
  aws_path "ruby"
end

Actions

  • :install - install the ruby package, build and upload if required

Parameters

  • version - Ruby version, must be of the form "1.9.3-p484" or "2.1.0" (NAME ATTRIBUTE)
  • rubygems - Version of rubygems to install
  • pkg_version - Iteration of the package (previous iterations will be upgraded)
  • gems - Additional gems to install
  • cache_uri_base - The base of the URI to find the cached package at
  • install_path - Path to install the ruby to (defaults to /opt/ruby-<version>)
  • ruby_url - URI to download ruby from (defaults to correct ftp.ruby-lang.org URI)
  • pkg_file - Name of the package to build/install (defaults to ruby-<version>-<pkg_version>_<platform>_<platform_version>_<arch>.deb)

Excluding any of these will avoid publishing to s3, but compile+install will still work:

  • aws_access_key_id - Access key for uploading to s3
  • aws_secret_key_id - Secret key for uploading to s3
  • aws_bucket - Bucket for uploading to s3
  • aws_path - Path inside the bucket for uploading to s3

This is a mini-alternatives system. It will look in the directory you specify and symlink all the binaries into /usr/bin.
By default it skips chef binaries to not conflict with omnibus-installed chef. You probably only want to use one of these
resources.

Example

This will setup symlinks in /usr/bin for the ruby-2.1.0 installed by the previous sk_ruby resource.

sk_ruby_symlinks "/opt/ruby-2.1.0/bin"

Actions

  • :install - Setup the symlinks

Parameters

  • bin_path - Path to the ruby binary directory (NAME ATTRIBUTE)
  • exclude - List of binaries not to link into /usr/bin (defaults to chef-client, knife, chef-solo, chef-shell, chef-apply, ohai, shef)

Recipes

  • default - Installs build depdendencies for building ruby based on the platform of the host (OPTIONAL)

Attributes

None

Usage

Put 'depends sk_ruby' in your metadata.rb to gain access to the LWRPs in your code.

Similar Cookbook

Bugs

  • There's an intentional ignore_failure true which throws a stack trace with a 404 on the first run when you haven't yet uploaded
    a pacakge to S3 yet. The stack trace is not a bug. Needs fixing in Chef.

  • Right after the 404 the remote_file resource leaves a zero-length turd which we are forced to clean up. Needs fixing in Chef.

Contributing

Just open a PR or Issue on GitHub.

DO NOT Submit PRs for Ruby 1.8.7 support.
DO NOT Submit PRs for Chef < 11.6.0 support.

If you want either of those, make a fork and maintain it yourself.

License and Author

Copyright:: 2014 Lamont Granquist

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.

Dependent cookbooks

build-essential >= 2.0.0
apt >= 0.0.0
sk_s3_file >= 0.0.0
yum-epel >= 0.0.0
zlib >= 0.0.0

Contingent cookbooks

There are no cookbooks that are contingent upon this one.

Foodcritic Metric
            

2.0.15 failed this metric

FC001: Use strings in preference to symbols to access node attributes: /tmp/cook/1b202706d4c89249d61a2abf/sk_ruby/providers/default.rb:7
FC001: Use strings in preference to symbols to access node attributes: /tmp/cook/1b202706d4c89249d61a2abf/sk_ruby/providers/default.rb:8
FC001: Use strings in preference to symbols to access node attributes: /tmp/cook/1b202706d4c89249d61a2abf/sk_ruby/providers/default.rb:16
FC019: Access node attributes in a consistent manner: /tmp/cook/1b202706d4c89249d61a2abf/sk_ruby/providers/default.rb:7
FC019: Access node attributes in a consistent manner: /tmp/cook/1b202706d4c89249d61a2abf/sk_ruby/providers/default.rb:8
FC019: Access node attributes in a consistent manner: /tmp/cook/1b202706d4c89249d61a2abf/sk_ruby/providers/default.rb:16
FC031: Cookbook without metadata file: /tmp/cook/1b202706d4c89249d61a2abf/sk_ruby/metadata.rb:1
FC045: Consider setting cookbook name in metadata: /tmp/cook/1b202706d4c89249d61a2abf/sk_ruby/metadata.rb:1