Adoptable Cookbooks List

Looking for a cookbook to adopt? You can now see a list of cookbooks available for adoption!
List of Adoptable Cookbooks

Supermarket Belongs to the Community

Supermarket belongs to the community. While Chef has the responsibility to keep it running and be stewards of its functionality, what it does and how it works is driven by the community. The chef/supermarket repository will continue to be where development of the Supermarket application takes place. Come be part of shaping the direction of Supermarket by opening issues and pull requests or by joining us on the Chef Mailing List.

Select Badges

Select Supported Platforms

Select Status

RSS

pg (6) Versions 1.2.0

Installs/Configures PostgreSQL.

Policyfile
Berkshelf
Knife
cookbook 'pg', '= 1.2.0', :supermarket
cookbook 'pg', '= 1.2.0'
knife supermarket install pg
knife supermarket download pg
README
Dependencies
Changelog
Quality 100%

pg Cookbook

Build Status

Table of Contents

  1. Overview
  2. Requirements
  3. Attributes
  4. Usage
  5. Contributing
  6. License & Authors

Overview

This module manages the installation and configuration of PostgreSQL.

Requirements

None.

Attributes

pg::server

Key Type Description Default
['pg']['use_pgdg'] Boolean Determines if Postgres should be installed from the PGDG. false
['pg']['manage_repo'] Boolean Determines if this cookbook should manage the PGDG repo. Only applies if ['pg']['use_pgdg'] is set to true. true
['pg']['pgdg']['version'] String Determines which version of Postgres should be installed/managed. Only applies if ['pg']['use_pgdg'] is set to true. 9.3
['pg']['initdb'] Boolean Determines if the intidb command should be run to do initial population of the database. true
['pg']['initdb_locale'] String Determines the locale to be used by the initdb command on systems running versions less than Postgres 9.4. UTF-8

The following attributes are used to populate postgresql.conf:

Key Type Description Default
['pg']['config']['server']['port'] Integer Port that Postgres should listen on. 5432
['pg']['config']['server']['max_connections'] Integer Determines the number of connection "slots" that are reserved for connections by PostgreSQL superusers. At most max_connections connections can ever be active simultaneously. Whenever the number of active concurrent connections is at least max_connections minus superuser_reserved_connections, new connections will be accepted only for superusers, and no new replication connections will be accepted. 100
['pg']['config']['server']['shared_buffers'] String Sets the amount of memory the database server uses for shared memory buffers. 32MB
['pg']['config']['server']['logging_collector'] Boolean This parameter enables the logging collector, which is a background process that captures log messages sent to stderr and redirects them into log files. true
['pg']['config']['server']['log_filename'] String When logging_collector is enabled, this parameter sets the file names of the created log files. The value is treated as a strftime pattern, so %-escapes can be used to specify time-varying file names. (Note that if there are any time-zone-dependent %-escapes, the computation is done in the zone specified by log_timezone.) The supported %-escapes are similar to those listed in the Open Group's strftime specification. Note that the system's strftime is not used directly, so platform-specific (nonstandard) extensions do not work. postgresql-%a.log
['pg']['config']['server']['log_truncate_on_rotation'] Boolean When logging_collector is enabled, this parameter will cause PostgreSQL to truncate (overwrite), rather than append to, any existing log file of the same name. true
['pg']['config']['server']['log_rotation_age'] String When logging_collector is enabled, this parameter determines the maximum lifetime of an individual log file. After this many minutes have elapsed, a new log file will be created. Set to zero to disable time-based creation of new log files. 1d
['pg']['config']['server']['log_rotation_size'] Integer When logging_collector is enabled, this parameter determines the maximum size of an individual log file. After this many kilobytes have been emitted into a log file, a new log file will be created. Set to zero to disable size-based creation of new log files. 0
['pg']['config']['server']['log_timezone'] String Sets the time zone used for timestamps written in the server log. Unlike TimeZone, this value is cluster-wide, so that all sessions will report timestamps consistently. UTC
['pg']['config']['server']['datestyle'] String Sets the display format for date and time values, as well as the rules for interpreting ambiguous date input values. iso, mdy
['pg']['config']['server']['timezone'] String Sets the time zone for displaying and interpreting time stamps. UTC
['pg']['config']['server']['lc_messages'] String Sets the language in which messages are displayed. en_US.UTF-8
['pg']['config']['server']['lc_monetary'] String Sets the locale to use for formatting monetary amounts, for example with the to_char family of functions. en_US.UTF-8
['pg']['config']['server']['lc_numeric'] String Sets the locale to use for formatting numbers, for example with the to_char family of functions. en_US.UTF-8
['pg']['config']['server']['lc_time'] String Sets the locale to use for formatting dates and times, for example with the to_char family of functions. en_US.UTF-8
['pg']['config']['server']['default_text_search_config'] String Selects the text search configuration that is used by those variants of the text search functions that do not have an explicit argument specifying the configuration. pg_catalog.english

NOTE: Values that read as on or off in postgresql.conf should be set as true or false respectively.

Finally the following default pg_hba.conf entries are:

default['pg']['config']['hba']['local'] = {
  enabled: true,
  type: 'local',
  database: 'all',
  user: 'postgres',
  address: '',
  method: 'trust'
}
default['pg']['config']['hba']['host'] = {
  enabled: true,
  type: 'host',
  database: 'all',
  user: 'all',
  address: '127.0.0.1/32',
  method: 'md5'
}
default['pg']['config']['hba']['host6'] = {
  enabled: true,
  type: 'host',
  database: 'all',
  user: 'all',
  address: '::1/128',
  method: 'md5'
}

The default pg_hba.conf entries can be disabled by setting their enabled values to false, e.g.:

default['pg']['config']['hba']['local']['enabled'] = false

pg::pgpool

Key Type Description Default
['pg']['config']['pgpool']['listen_addresses'] String Specifies the hostname or IP address, on which pgpool-II will accept TCP/IP connections. localhost
['pg']['config']['pgpool']['port'] Integer The port number used by pgpool-II to listen for connections. 9999
['pg']['config']['pgpool']['socket_dir'] String The directory where the UNIX domain socket accepting connections for pgpool-II will be created. /tmp
['pg']['config']['pgpool']['listen_backlog_multiplier'] Integer Controls the length of connection queue from frontend to pgpool-II. 2
['pg']['config']['pgpool']['serialize_accept'] Boolean Whether to serialize accept() call for incoming client connections. false
['pg']['config']['pgpool']['pcp_listen_addresses'] String Specifies the hostname or IP address, on which pcp process will accept TCP/IP connections. *
['pg']['config']['pgpool']['pcp_port'] Integer The port number where PCP process accepts connections. 9898
['pg']['config']['pgpool']['pcp_socket_dir'] String The directory path of the UNIX domain socket accepting connections for the PCP process. /tmp
['pg']['config']['pgpool']['backend_hostname0'] String Specifies where to connect with the PostgreSQL backend. It is used by pgpool-II to communicate with the server. localhost
['pg']['config']['pgpool']['backend_port0'] Integer Specifies the port number of the backends. 5432
['pg']['config']['pgpool']['backend_weight0'] Integer Specifies the load balance ratio for the backends. 1
['pg']['config']['pgpool']['backend_data_directory0'] Integer Specifies the database cluster directory of the backends. ''
['pg']['config']['pgpool']['backend_flag0'] String Controls various backend behavior. ALLOW_TO_FAILOVER
['pg']['config']['pgpool']['enable_pool_hba'] Boolean Just like the pg_hba.conf file for PostgreSQL. false
['pg']['config']['pgpool']['authentication_timeout'] Integer Specify the timeout for pgpool authentication. 60
['pg']['config']['pgpool']['ssl'] Boolean If true, enable SSL support for both the frontend and backend connections. false
['pg']['config']['pgpool']['num_init_children'] Integer The number of preforked pgpool-II server processes. 32
['pg']['config']['pgpool']['max_pool'] Integer The maximum number of cached connections in pgpool-II children processes. 4
['pg']['config']['pgpool']['child_life_time'] Integer A pgpool-II child process' life time in seconds. 300
['pg']['config']['pgpool']['child_max_connections'] Integer A pgpool-II child process will be terminated after this many connections from clients. 0
['pg']['config']['pgpool']['connection_life_time'] Integer Cached connections expiration time in seconds. An expired cached connection will be disconnected. 0
['pg']['config']['pgpool']['client_idle_limit'] Integer Disconnect a client if it has been idle for client_idle_limit seconds after the last query has completed. 0
['pg']['config']['pgpool']['log_destination'] String PgPool II supports several methods for logging server messages, including stderr and syslog. stderr
['pg']['config']['pgpool']['log_line_prefix'] String This is a printf-style string that is output at the beginning of each log line. %t: pid %p:
['pg']['config']['pgpool']['log_connections'] Boolean If true, all incoming connections will be printed to the log. false
['pg']['config']['pgpool']['log_hostname'] Boolean If true, ps command status will show the client's hostname instead of an IP address. false
['pg']['config']['pgpool']['log_statement'] Boolean Produces SQL log messages when true. false
['pg']['config']['pgpool']['log_per_node_statement'] Boolean Similar to log_statement, except that it prints logs for each DB node separately. false
['pg']['config']['pgpool']['log_standby_delay'] String Specifies how to log the replication delay. none
['pg']['config']['pgpool']['syslog_facility'] String When logging to syslog is enabled, this parameter determines the syslog "facility" to be used. LOCAL0
['pg']['config']['pgpool']['syslog_ident'] String When logging to syslog is enabled, this parameter determines the program name used to identify PgPool messages in syslog logs. pgpool
['pg']['config']['pgpool']['debug_level'] Integer Debug message verbosity level. 0
['pg']['config']['pgpool']['connection_cache'] Boolean Caches connections to backends when set to true. true
['pg']['config']['pgpool']['reset_query_list'] String Specifies the SQL commands sent to reset the connection to the backend when exiting a session. ABORT; DISCARD ALL
['pg']['config']['pgpool']['replication_mode'] Boolean Setting to true enables replication mode. false
['pg']['config']['pgpool']['insert_lock'] Boolean If replicating a table with SERIAL data type, the SERIAL column value may differ between the backends. true
['pg']['config']['pgpool']['lobj_lock_table'] String This parameter specifies a table name used for large object replication control. ''
['pg']['config']['pgpool']['replication_stop_on_mismatch'] Boolean When set to true, if all backends don't return the same packet kind, the backends that differ from most frequent result set are degenerated. false
['pg']['config']['pgpool']['failover_if_affected_tuples_mismatch'] Boolean When set to true, if backends don't return the same number of affected tuples during an INSERT/UPDATE/DELETE, the backends that differ from most frequent result set are degenerated. false
['pg']['config']['pgpool']['load_balance_mode'] Boolean When set to true, SELECT queries will be distributed to each backend for load balancing. Default is false. false
['pg']['config']['pgpool']['ignore_leading_white_space'] Boolean pgpool-II ignores white spaces at the beginning of SQL queries while in the load balance mode. true
['pg']['config']['pgpool']['white_function_list'] String Specify a comma separated list of function names that do not update the database. ''
['pg']['config']['pgpool']['black_function_list'] String Specify a comma separated list of function names that do update the database. nextval,setval,nextval,setval
['pg']['config']['pgpool']['database_redirect_preference_list'] String You can set "database name:node id" pair to specify the node id when connecting to the database. ''
['pg']['config']['pgpool']['app_name_redirect_preference_list'] String You can set "application name:node id" pair to specify the node id when the application is used. ''
['pg']['config']['pgpool']['allow_sql_comments'] Boolean If on, ignore SQL comments when judging if load balance or query cache is possible. If off, SQL comments effectively prevent the judgment (pre 3.4 behavior). false
['pg']['config']['pgpool']['master_slave_mode'] Boolean This mode is used to couple pgpool-II with another master/slave replication software (like Slony-I and Streaming replication), which is responsible for doing the actual data replication. false
['pg']['config']['pgpool']['master_slave_sub_mode'] String The master/slave mode has a master_slave_sub mode. The default is slony which is suitable for Slony-I. You can also set it to stream, which should be set if you want to work with PostgreSQL's built-in replication system (Streaming Replication). slony
['pg']['config']['pgpool']['sr_check_period'] Integer This parameter specifies the interval between the streaming replication delay checks in seconds. 0
['pg']['config']['pgpool']['sr_check_user'] String The user name to perform streaming replication check. nobody
['pg']['config']['pgpool']['sr_check_password'] String The password of the user to perform streaming replication check. ''
['pg']['config']['pgpool']['sr_check_database'] String The database to perform streaming replication delay check. postgres
['pg']['config']['pgpool']['delay_threshold'] Integer Specifies the maximum tolerated replication delay of the standby against the primary server in WAL bytes. 0
['pg']['config']['pgpool']['follow_master_command'] String This parameter specifies a command to run in master/slave streaming replication mode only after a master failover ''
['pg']['config']['pgpool']['health_check_period'] Integer This parameter specifies the interval between the health checks in seconds. 0
['pg']['config']['pgpool']['health_check_timeout'] Integer pgpool-II periodically tries to connect to the backends to detect any error on the servers or networks. 20
['pg']['config']['pgpool']['health_check_user'] String The user name to perform health check. nobody
['pg']['config']['pgpool']['health_check_password'] String The password of the user to perform health check. ''
['pg']['config']['pgpool']['health_check_database'] String The database name to perform health check. ''
['pg']['config']['pgpool']['health_check_max_retries'] Integer The maximum number of times to retry a failed health check before giving up and initiating failover. 0
['pg']['config']['pgpool']['health_check_retry_delay'] Integer The amount of time (in seconds) to sleep between failed health check retries (not used unless health_check_max_retries is > 0). 1
['pg']['config']['pgpool']['failover_command'] String This parameter specifies a command to run when a node is detached. ''
['pg']['config']['pgpool']['failback_command'] String This parameter specifies a command to run when a node is attached. ''
['pg']['config']['pgpool']['fail_over_on_backend_error'] Boolean If true, and an error occurs when reading/writing to the backend communication, pgpool-II will trigger the fail over procedure. true
['pg']['config']['pgpool']['search_primary_node_timeout'] Integer The parameter specifies the maximum amount of time in seconds to search for a primary node when a failover scenario occurs. 10
['pg']['config']['pgpool']['recovery_user'] String This parameter specifies a PostgreSQL user name for online recovery. nobody
['pg']['config']['pgpool']['recovery_password'] String This parameter specifies a PostgreSQL password for online recovery. ''
['pg']['config']['pgpool']['recovery_1st_stage_command'] String This parameter specifies a command to be run by master(primary) PostgreSQL server at the first stage of online recovery. ''
['pg']['config']['pgpool']['recovery_2nd_stage_command'] String This parameter specifies a command to be run by master(primary) PostgreSQL server at the second stage of online recovery. ''
['pg']['config']['pgpool']['recovery_timeout'] Integer pgpool does not accept new connections during the second stage. If a client connects to pgpool during recovery processing, it will have to wait for the end of the recovery. This parameter specifies recovery timeout in sec. If this timeout is reached, pgpool cancels online recovery and accepts connections. 90
['pg']['config']['pgpool']['client_idle_limit_in_recovery'] Integer Similar to client_idle_limit but only takes effect in the second stage of recovery. 0
['pg']['config']['pgpool']['use_watchdog'] Boolean If on, activates watchdog. false
['pg']['config']['pgpool']['trusted_servers'] String The list of trusted servers to check the up stream connections. ''
['pg']['config']['pgpool']['ping_path'] String This parameter specifies a path of ping command for monitoring connection to the upper servers. /bin
['pg']['config']['pgpool']['wd_hostname'] String Specifies the hostname or IP address of pgpool-II server. ''
['pg']['config']['pgpool']['wd_port'] Integer Specifies the port number for watchdog communication. 9000
['pg']['config']['pgpool']['wd_priority'] Integer This parameter can be used to elevate the local watchdog node priority in the elections to select master watchdog node. 1
['pg']['config']['pgpool']['wd_authkey'] String This option specifies the authentication key used in watchdog communication. All the pgpool-II must have the same key. ''
['pg']['config']['pgpool']['wd_ipc_socket_dir'] String The directory where the UNIX domain socket accepting pgpool-II watchdog IPC connections will be created. /tmp
['pg']['config']['pgpool']['delegate_IP'] String Specifies the virtual IP address (VIP) of pgpool-II that is connected from client servers (application servers etc.). ''
['pg']['config']['pgpool']['if_cmd_path'] String This parameter specifies a path of a command to switch the IP address. /sbin
['pg']['config']['pgpool']['if_up_cmd'] String This parameter specifies a command to bring up the virtual IP. ip addr add $_IP_$/24 dev #{node['network']['default_interface']} label #{node['network']['default_interface']}:0
['pg']['config']['pgpool']['if_down_cmd'] String This parameter specifies a command to bring down the virtual IP. ip addr del $_IP_$/24 dev #{node['network']['default_interface']}
['pg']['config']['pgpool']['arping_path'] String This parameter specifies a path of a command to send an ARP request after the virtual IP is switched. /usr/sbin
['pg']['config']['pgpool']['arping_cmd'] String This parameter specifies a command to send an ARP request after the virtual IP is switched. arping -U $_IP_$ -w 1
['pg']['config']['pgpool']['clear_memqcache_on_escalation'] Boolean If this is on, watchdog clears all the query cache in the shared memory when pgpool-II escaltes to active. true
['pg']['config']['pgpool']['wd_escalation_command'] String Watchdog executes this command on the node that is escalated to the master watchdog. ''
['pg']['config']['pgpool']['wd_de_escalation_command'] String Watchdog executes this command on the master pgpool-II watchdog node when that node resigns from the master node responsibilities. ''
['pg']['config']['pgpool']['wd_monitoring_interfaces_list'] String Specify a comma separated list of network device names, to be monitored by the watchdog process for the network link state. ''
['pg']['config']['pgpool']['wd_lifecheck_method'] String This parameter specifies the method of life check. This can be either of heartbeat (default), query or external. heartbeat
['pg']['config']['pgpool']['wd_interval'] Integer This parameter specifies the interval between life checks of pgpool-II in second. 10
['pg']['config']['pgpool']['wd_heartbeat_port'] Integer This option specifies the port number to receive heartbeat signals. 9694
['pg']['config']['pgpool']['wd_heartbeat_keepalive'] Integer This option specifies the interval time (sec.) of sending heartbeat signals. 2
['pg']['config']['pgpool']['wd_heartbeat_deadtime'] Integer If there are no heartbeat signal for the period specified by this option, watchdog regards it as failure of the remote pgpool-II. 30
['pg']['config']['pgpool']['heartbeat_destination0'] String This option specifies the destination of heartbeat signals by IP address or hostname. host0_ip1
['pg']['config']['pgpool']['heartbeat_destination_port0'] Integer This option specifies the port number of destination of heartbeat signals which is specified by heartbeat_destinationX. 9694
['pg']['config']['pgpool']['heartbeat_device0'] String This option specifies the network device name for sending heartbeat signals to destination specified by heartbeat_destinationX. ''
['pg']['config']['pgpool']['wd_life_point'] Integer The times to retry a failed life check of pgpool-II. 3
['pg']['config']['pgpool']['wd_lifecheck_query'] String Actual query to check pgpool-II. SELECT 1
['pg']['config']['pgpool']['wd_lifecheck_dbname'] String The database name connected for checking pgpool-II. template1
['pg']['config']['pgpool']['wd_lifecheck_user'] String The user name to check pgpool-II. nobody
['pg']['config']['pgpool']['wd_lifecheck_password'] String The password of the user to check pgpool-II. ''
['pg']['config']['pgpool']['relcache_expire'] Integer Life time of relation cache in seconds. 0
['pg']['config']['pgpool']['relcache_size'] Integer Number of relcache entries. 256
['pg']['config']['pgpool']['check_temp_table'] Boolean If on, enable temporary table check in SELECT statements. true
['pg']['config']['pgpool']['check_unlogged_table'] Boolean If on, enable unlogged table check in SELECT statements. true
['pg']['config']['pgpool']['memory_cache_enabled'] Boolean To enable the memory cache functionality, set this to on. false
['pg']['config']['pgpool']['memqcache_method'] String Memory cache behavior can be specified by memqcache_method directive. Either shmem (shared memory) or memcached. shmem
['pg']['config']['pgpool']['memqcache_memcached_host'] String Specify the host name or the IP address in which memcached works. localhost
['pg']['config']['pgpool']['memqcache_memcached_port'] Integer Specify the port number of memcached. 11211
['pg']['config']['pgpool']['memqcache_total_size'] Integer Specify the size of shared memory as cache storage in bytes. 67108864
['pg']['config']['pgpool']['memqcache_max_num_cache'] Integer Specify the number of cache entries. 1000000
['pg']['config']['pgpool']['memqcache_expire'] Integer Life time of query cache in seconds. 0
['pg']['config']['pgpool']['memqcache_auto_cache_invalidation'] Boolean If on, automatically deletes cache related to the updated tables. true
['pg']['config']['pgpool']['memqcache_maxcache'] Integer If the size of a SELECT result is larger than memqcache_maxcache bytes, it is not cached and the messages is shown: 2012-05-02 15:08:17 LOG: pid 13756: pool_add_temp_query_cache: data size exceeds memqcache_maxcache. current:4095 requested:111 memq_maxcache:4096. To avoid this problem, you have to set memqcache_maxcache larger. 409600
['pg']['config']['pgpool']['memqcache_cache_block_size'] Integer If cache storage is shared memory, pgpool uses the memory divided by memqcache_cache_block_size. 1048576
['pg']['config']['pgpool']['memqcache_oiddir'] String Full path to the directory where oids of tables used by SELECTs are stored. /var/log/pgpool/oiddir
['pg']['config']['pgpool']white_memqcache_table_list String Specify a comma separated list of table names whose SELECT results are to be cached even if they are VIEWs or unlogged tables. ''
['pg']['config']['pgpool']['black_memqcache_table_list'] String Specify a comma separated list of table names whose SELECT results are NOT to be cached. ''
['pg']['config']['pgpool']['pid_file_name'] String Full path to a file which contains pgpool's process id. /var/run/pgpool-II-#{node['pg']['pgdg']['version'].delete('.')}/pgpool.pid
['pg']['config']['pgpool']['logdir'] String pgpool_status is written into this directory. /var/log/pgpool-II-#{node['pg']['pgdg']['version'].delete('.')}

The following default entry is added to pool_hba.conf:

default['pg']['config']['pool_hba']['md5'] = {
  enabled: true,
  type: 'host',
  database: 'all',
  user: 'all',
  address: '0.0.0.0/0',
  method: 'md5'
}

Usage

This recipe:

  • Optionally sets up the PGDG repo.
  • Installs Postgres Client.
  • Installs Postgres Server.
  • Configures Postgres Server.
  • Configures Host-Based Authentication.
  • Manages Postgres service.
  • Installs pgpool-II.
  • Configures pgpool-II (including PCP & HBA).
  • Manages pgpool-II service.

To install the Postgres client:

include_recipe 'pg::client'

To install the Postgres server:

include_recipe 'pg::server'

To install pgpool-II:

include_recipe 'pg::pgpool'

pg_hba.conf

To create new entries in pg_hba.conf create a new uniquely named hash under ['pg']['config']['hba'], e.g.:

default['pg']['config']['hba']['www'] = {
  enabled: true,
  type: 'host',
  database: 'www',
  user: 'www',
  address: '192.168.0.1/32',
  method: 'md5'
}

pool_hba.conf

To create new entries in pool_hba.conf for pgpool-II servers create a new uniquely named hash under ['pg']['config']['pool_hba'], e.g.:

default['pg']['config']['pool_hba']['www'] = {
  enabled: true,
  type: 'host',
  database: 'www',
  user: 'www',
  address: '192.168.0.1/32',
  method: 'trust'
}

Contributing

If you would like to contribute to this cookbook please follow these steps;

  1. Fork the repository on Github.
  2. Create a named feature branch (like add_component_x).
  3. Write your change.
  4. Write tests for your change (if applicable).
  5. Write documentation for your change (if applicable).
  6. Run the tests, ensuring they all pass.
  7. Submit a Pull Request using GitHub.

License and Authors

License: BSD 2-Clause

Authors:

Dependent cookbooks

yum >= 3.5.2

Contingent cookbooks

There are no cookbooks that are contingent upon this one.

2016-03-14 (v1.2.0)

Summary

Added pgpool-II support.

Features

  • Added pgpool-II support.
    • Install pgpool-II from PGDG.
    • Manage all config files.
    • Manage pgpool-II service.

2016-03-12 (v1.1.0)

Summary

Made initdb optional.

Features

  • Made initdb optional in order to support SR (Streaming Replication) set-ups where the slave should not be initialised with it's own data. This value is set to true by default.

2016-03-07 (v1.0.0)

Summary

Initial release.

Features

  • Install Client and/or Server.
  • Use distro or PGDG packages.
  • Optionally manage the PGDG repo.
  • Manage postgresql.conf values.
  • Manage entries in pg_hba.conf.
  • Manage the Postgres service.

Foodcritic Metric
            

1.2.0 passed this metric