Description

Installs and configures rsyslog to replace sysklogd for client and/or
server use. By default, the service will be configured to log to
files on local disk. See the Recipes and Examples sections
for other uses.

Major Changes in 1.2.0: See CHANGELOG.md

Important Changes in 1.1.0: See the CHANGELOG.md file for
important changes to this cookbook. There are some incompatibilities
with existing installations. Use version 1.0.0 if you're not ready
for these changes.

Requirements

Platform

Tested on Ubuntu 9.10, 10.04 and Red Hat 6.3

Ubuntu 8.04, 8.10, and 9.04 are no longer supported releases and have not been tested with this cookbook.

Other

To use the recipe[rsyslog::client] recipe, you'll need to set up the rsyslog.server_search or rsyslog.server_ip attributes. See the Recipes and Examples sections below.

Attributes

See attributes/default.rb for default values.

• node['rsyslog']['log_dir'] - If the node is an rsyslog server, this specifies the directory where the logs should be stored.
• node['rsyslog']['server'] - Determined automaticaly and set to true on the server.
• node['rsyslog']['server_ip'] - If not defined then search will be used to determine rsyslog server. Default is nil.
• node['rsyslog']['server_search'] - Specify the criteria for the server search operation. Default is role:loghost.
• node['rsyslog']['protocol'] - Specify whether to use udp or tcp for remote loghost. Default is tcp.
• node['rsyslog']['port'] - Specify the port which rsyslog should connect to a remote loghost.
• node['rsyslog']['remote_logs'] - Specify wether to send all logs to a remote server (client option). Default is true.
• node['rsyslog']['per_host_dir'] - "PerHost" directories for template statements in 35-server-per-host.conf. Default value is the previous cookbook version's value, to preserve compatibility. See server recipe below.
• node['rsyslog']['user'] - Specify the user to run and write files as.
• node['rsyslog']['group'] - Specify the group to run and write files as.
• node['rsyslog']['priv_seperation'] - Whether to use privilege seperation or not.
• node['rsyslog']['max_message_size'] - Specify the maximum allowed message size. Default is 2k.
• node['rsyslog']['preserve_fqdn'] - Specify if the full host name will be used. Default is off.
• node['rsyslog']['user'] - Who should own the configuration files and directories
• node['rsyslog']['group'] - Who should group-own the configuration files and directories
• node['rsyslog']['defaults_file'] - The full path to the defaults/sysconfig file for the service.
• node['rsyslog']['service_name'] - The platform-specific name of the service
• node['rsyslog']['preserve_fqdn'] - Value of the $PreserveFQDN configuration directive in /etc/rsyslog.conf. Default is 'off' for compatibility purposes.

Recipes

default

Installs the rsyslog package, manages the rsyslog service and sets up basic
configuration for a standalone machine.

client

Includes recipe[rsyslog].

Uses node['rsyslog']['server_ip'] or Chef search (in that precedence order)
to determine the remote syslog server's IP address. If search is used, the
search query will look for the first ipaddress returned from the criteria
specified in node['rsyslog']['server_search'].

If the node itself is a rsyslog server ie it has rsyslog.server set to true
then the configuration is skipped.

If the node had an /etc/rsyslog.d/35-server-per-host.conf file previously configured,
this file gets removed to prevent duplicate logging.

Any previous logs are not cleaned up from the log_dir.

server

Configures the node to be a rsyslog server. The chosen rsyslog server
node should be defined in the server_ip attribute or resolvable by
the specified search criteria specified in node['rsyslog']['server_search]
(so that nodes making use of the client recipe can find the server to log to).

This recipe will create the logs in node['rsyslog']['log_dir'], and
the configuration is in /etc/rsyslog.d/server.conf. This recipe also
removes any previous configuration to a remote server by removing the
/etc/rsyslog.d/remote.conf file.

The cron job used in the previous version of this cookbook is removed,
but it does not remove any existing cron job from your system (so it
doesn't break anything unexpectedly). We recommend setting up
logrotate for the logfiles instead.

The log_dir will be concatenated with per_host_dir to store the
logs for each client. Modify the attribute to have a value that is
allowed by rsyslogs template matching values, see the rsyslog
documentation for this.

Directory structure:

<%= @log_dir %>/<%= @per_host_dir %>/"logfile"

For example for the system with hostname www:

/srv/rsyslog/2011/11/19/www/messages

For example, to change this to just the hostname, set the attribute
node['rsyslog']['per_host_dir'] via a role:

"rsyslog" => { "per_host_dir" => "%HOSTNAME%" }

At this time, the server can only listen on UDP or TCP.

Usage

Use recipe[rsyslog] to install and start rsyslog as a basic
configured service for standalone systems.

Use recipe[rsyslog::client] to have nodes log to a remote server
(which is found via the server_ip attribute or by the recipe's
search call -- see client)

Use recipe[rsyslog::server] to set up a rsyslog server. It will listen on
node['rsyslog']['port'] protocol node['rsyslog']['protocol'].

If you set up a different kind of centralized loghost (syslog-ng,
graylog2, logstash, etc), you can still send log messages to it as
long as the port and protocol match up with the server
software. See Examples

Examples

A base role (e.g., roles/base.rb), applied to all nodes so they are syslog clients:

name "base"
description "Base role applied to all nodes
run_list("recipe[rsyslog::client]")

Then, a role for the loghost (should only be one):

name "loghost"
description "Central syslog server"
run_list("recipe[rsyslog::server]")

By default this will set up the clients search for a node with the
loghost role to talk to the server on TCP port 514. Change the
protocol and port rsyslog attributes to modify this.

If you want to specify another syslog compatible server with a role other
than loghost, simply fill free to use the server_ip attribute or
the server_search attribute.

Example role that sets the per host directory:

name "loghost"
description "Central syslog server"
run_list("recipe[rsyslog::server]")
default_attributes(
  "rsyslog" => { "per_host_dir" => "%HOSTNAME%" }
)

License and Author

Author:: Joshua Timberman (joshua@opscode.com)
Author:: Denis Barishev (denz@twiket.com)

Copyright:: 2009-2012, Opscode, Inc

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.