Adoptable Cookbooks List

Looking for a cookbook to adopt? You can now see a list of cookbooks available for adoption!
List of Adoptable Cookbooks

Supermarket Belongs to the Community

Supermarket belongs to the community. While Chef has the responsibility to keep it running and be stewards of its functionality, what it does and how it works is driven by the community. The chef/supermarket repository will continue to be where development of the Supermarket application takes place. Come be part of shaping the direction of Supermarket by opening issues and pull requests or by joining us on the Chef Mailing List.

Select Badges

Select Supported Platforms


opennebula_ng (14) Versions 0.2.0

Installs/Configures opennebula_ng

cookbook 'opennebula_ng', '= 0.2.0'
cookbook 'opennebula_ng', '= 0.2.0', :supermarket
knife supermarket install opennebula_ng
knife supermarket download opennebula_ng
Quality -%

opennebula_ng cookbook

A cookbook for managing OpenNebula via the Chef configuration management tool.

Supported Platforms

  • Debian
  • Ubuntu


To setup a minimal configuration, standalone OpenNebula server, set the following attributes to configure your network

node['opennebula_ng']['interfaces']['br0']['type'] = 'inet static'
node['opennebula_ng']['interfaces']['br0']['address'] = ''
node['opennebula_ng']['interfaces']['br0']['network'] = ''
node['opennebula_ng']['interfaces']['br0']['netmask'] = ''
node['opennebula_ng']['interfaces']['br0']['broadcast'] = ''
node['opennebula_ng']['interfaces']['br0']['gateway'] = ''

And run the following recipes:

  • default
  • sunstone
  • node
  • register_nodes

This will do the following things

  • Install the Sunstone frontend
  • Configure the network, add OpenNebula bridge
  • Register the current host as an OpenNebula node

You should be able to connect to your new OpenNebula installation using



The default recpe just includes the apt_repository recipe


This recipe sets up the official OpenNebula PPA for Ubuntu (stable)


This recipe installs and configures the sunstone frontend.

  • Installs opennebula and opennebula-sunstone packages
  • Takes care of SSH and authorized_keys configuration


This recipe turns your machine into an opennebula node

  • Configures networking according to node attributes (DANGER: touches /etc/network/interfaces)
  • Configures the OpenNebula bridge interface
  • Configures qEMU
  • Configures libvirt

MAKE SURE you configure the following attributes (e.g. create one file for each node in your wrapper cookbooks attribute dir, e.g. attributes/myhost1.rb)

if == 'myhost1'
  node['opennebula_ng']['interfaces']['br0']['type'] = 'inet static'
  node['opennebula_ng']['interfaces']['br0']['address'] = ''
  node['opennebula_ng']['interfaces']['br0']['network'] = ''
  node['opennebula_ng']['interfaces']['br0']['netmask'] = ''
  node['opennebula_ng']['interfaces']['br0']['broadcast'] = ''
  node['opennebula_ng']['interfaces']['br0']['gateway'] = ''

  node['opennebula_ng']['interfaces']['br0']['bridge_ports'] = 'eth0'
  node['opennebula_ng']['interfaces']['br0']['bridge_fd'] = 9
  node['opennebula_ng']['interfaces']['br0']['bridge_hello'] = 2
  node['opennebula_ng']['interfaces']['br0']['bridge_maxage'] = 12
  node['opennebula_ng']['interfaces']['br0']['bridge_stp'] = 'off'

You can also configure additional interfaces, if required

node['opennebula_ng']['interfaces']['br1']['type'] = 'inet static'
node['opennebula_ng']['interfaces']['br1']['address'] = ''
node['opennebula_ng']['interfaces']['br1']['network'] = ''
node['opennebula_ng']['interfaces']['br1']['netmask'] = ''
node['opennebula_ng']['interfaces']['br1']['broadcast'] = ''

node['opennebula_ng']['interfaces']['br1']['bridge_ports'] = 'eth1'
node['opennebula_ng']['interfaces']['br1']['bridge_fd'] = 9
node['opennebula_ng']['interfaces']['br1']['bridge_hello'] = 2
node['opennebula_ng']['interfaces']['br1']['bridge_maxage'] = 12
node['opennebula_ng']['interfaces']['br1']['bridge_stp'] = 'off'


This recipe registers your hosts at oned.

The configuration is set via attributes, and supports all parameters that onehost supports.

The default is to register the node chef is currently running on, using kvm

# You can add all your nodes centrally here
node['opennebula_ng']['nodes'] = {
  myhost1: { im: 'kvm', vm: 'kvm', net: 'dummy' },
  myhost2: { im: 'kvm', vm: 'kvm', net: 'dummy' },
  myhost3: { im: 'kvm', vm: 'kvm', net: 'dummy' },


This recipe registers virtual networks using onenet.

You can specify your network configuration using the following attributes. Both fixed and ranged networks are supported.

node['opennebula_ng']['virtual_networks'] = {
  frontnet: {
    TYPE: 'fixed',
    BRIDGE: 'br0',
    GATEWAY: '',
    DNS: '""',
    LEASES: ['[ IP= ]', '[ IP= ]']
  backnet: {
    TYPE: 'ranged',
    BRIDGE: 'br1',
    IP_START: '',
    IP_END: '',


A recipe to configure LVM datastores.

  • Installs and configures lvm packages
  • Creates datastores according to attributes

You can configure the datastores using the following attributes:

node['opennebula_ng']['lvm']['datastores'] = {
  'my datastore' => {
    DS_MAD: 'lvm',
    TM_MAD: 'lvm',
    VG_NAME: 'vg-one',
    BRIDGE_LIST: node['hostname'], # Add all hostnames of hosts accessing this datastore


This recipe configures the host to be a NFS server. It can be configured using the following attributes:

# Network to export NFS directories to, defaults to all hosts
node['opennebula_ng']['nfs']['network'] = '*' # or a network like e.g. ''

# NFS fsid. Must be unique
node['opennebula_ng']['nfs']['fsid'] = 1

# Hostname/IP of the NFS server (usually the frontend machine)
node['opennebula_ng']['nfs']['server'] = 'myhost1'


Configures the host to be an NFS client, mouting /var/lib/one from the server stored in node['opennebula_ng']['nfs']['server']

Other attributes

You can configure the location of the "oneadmin" home directory and auth file in case needed.

node['opennebula_ng']['one_auth'] = '/var/lib/one/.one/one_auth'
node['opennebula_ng']['one_home'] = '/var/lib/one'


Please be aware, that you probably want a reverse proxy like nginx incl. SSL before you deploy OpenNebula to your production servers.

You can easily do this e.g. using the certificate and nginx cookbooks.


  1. Fork the repository on Github
  2. Create a named feature branch (i.e. add-new-recipe)
  3. Write you change
  4. Write tests for your change (if applicable)
  5. Run the tests, ensuring they all pass
  6. Submit a Pull Request


Author: Chris Aumann (
Copyright: Copyright (c) 2014 Vaamo Finanz AG
License: Apache License, Version 2.0

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Dependent cookbooks

nfs >= 0.0.0
apt >= 0.0.0

Contingent cookbooks

There are no cookbooks that are contingent upon this one.


  • Initial release of opennebula_ng

No quality metric results found