Adoptable Cookbooks List

Looking for a cookbook to adopt? You can now see a list of cookbooks available for adoption!
List of Adoptable Cookbooks

Supermarket Belongs to the Community

Supermarket belongs to the community. While Chef has the responsibility to keep it running and be stewards of its functionality, what it does and how it works is driven by the community. The chef/supermarket repository will continue to be where development of the Supermarket application takes place. Come be part of shaping the direction of Supermarket by opening issues and pull requests or by joining us on the Chef Mailing List.

Select Badges

Select Supported Platforms

Select Status

RSS

google-cloud (4) Versions 0.2.0

Bundle cookbook to install all Chef GCP cookbooks.

Policyfile
Berkshelf
Knife
cookbook 'google-cloud', '= 0.2.0', :supermarket
cookbook 'google-cloud', '= 0.2.0'
knife supermarket install google-cloud
knife supermarket download google-cloud
README
Dependencies
Changelog
Quality 33%

Google Cloud Platform for Chef

This cookbook installs all Google cookbooks for Chef to allow managing
Google Cloud Platform resources from your Chef environment

Table of Contents

  1. Description
  2. Setup
  3. Supported Google Cloud Platform Products
  4. Summary of Supported Products Types / Providers
  5. Supported Operating Systems

Description

This cookbook is a convenience to install all Google Cloud Platform cookbooks
for Chef with a single command. You can install them individually if you wish
as well.

Setup

To install this cookbook, insert the following into your Berksfile.

cookbook 'google-cloud', '~> 0.2.0'

Supported Google Cloud Platform Products

The google/cloud cookbook installs the following cookbooks automatically:

Summary of Supported Products Types / Providers

Below you can find a summary of each supported type and a brief description of
its intended behavior. For full details about each provider, properties,
parameters, usage and examples please visit its respective Chef cookbook project
page.

Google Compute Engine

Detailed information can be found at the
google-gcompute project home page.
The list below is a summary of the supported types by the cookbook:

  • gcompute_address
    Represents an Address resource.
    Each virtual machine instance has an ephemeral internal IP address and,
    optionally, an external IP address. To communicate between instances on
    the same network, you can use an instance's internal IP address. To
    communicate with the Internet and instances outside of the same network,
    you must specify the instance's external IP address.
    Internal IP addresses are ephemeral and only belong to an instance for
    the lifetime of the instance; if the instance is deleted and recreated,
    the instance is assigned a new internal IP address, either by Compute
    Engine or by you. External IP addresses can be either ephemeral or
    static.

  • gcompute_backend_bucket
    Backend buckets allow you to use Google Cloud Storage buckets with HTTP(S)
    load balancing.
    An HTTP(S) load balancing can direct traffic to specified URLs to a
    backend bucket rather than a backend service. It can send requests for
    static content to a Cloud Storage bucket and requests for dynamic content
    a virtual machine instance.

  • gcompute_backend_service
    Creates a BackendService resource in the specified project using the data
    included in the request.

  • gcompute_disk_type
    Represents a DiskType resource. A DiskType resource represents the type
    of disk to use, such as a pd-ssd or pd-standard. To reference a disk
    type, use the disk type's full or partial URL.

  • gcompute_disk
    Persistent disks are durable storage devices that function similarly to
    the physical disks in a desktop or a server. Compute Engine manages the
    hardware behind these devices to ensure data redundancy and optimize
    performance for you. Persistent disks are available as either standard
    hard disk drives (HDD) or solid-state drives (SSD).
    Persistent disks are located independently from your virtual machine
    instances, so you can detach or move persistent disks to keep your data
    even after you delete your instances. Persistent disk performance scales
    automatically with size, so you can resize your existing persistent disks
    or add more persistent disks to an instance to meet your performance and
    storage space requirements.
    Add a persistent disk to your instance when you need reliable and
    affordable storage with consistent performance characteristics.

  • gcompute_firewall
    Each network has its own firewall controlling access to and from the
    instances.
    All traffic to instances, even from other instances, is blocked by the
    firewall unless firewall rules are created to allow it.
    The default network has automatically created firewall rules that are
    shown in default firewall rules. No manually created network has
    automatically created firewall rules except for a default "allow" rule for
    outgoing traffic and a default "deny" for incoming traffic. For all
    networks except the default network, you must create any firewall rules
    you need.

  • gcompute_forwarding_rule
    A ForwardingRule resource. A ForwardingRule resource specifies which pool
    of target virtual machines to forward a packet to if it matches the given
    [IPAddress, IPProtocol, portRange] tuple.

  • gcompute_global_address
    Represents a Global Address resource. Global addresses are used for
    HTTP(S) load balancing.

  • gcompute_global_forwarding_rule
    Represents a GlobalForwardingRule resource. Global forwarding rules are
    used to forward traffic to the correct load balancer for HTTP load
    balancing. Global forwarding rules can only be used for HTTP load
    balancing.
    For more information, see
    https://cloud.google.com/compute/docs/load-balancing/http/

  • gcompute_http_health_check
    An HttpHealthCheck resource. This resource defines a template for how
    individual VMs should be checked for health, via HTTP.

  • gcompute_https_health_check
    An HttpsHealthCheck resource. This resource defines a template for how
    individual VMs should be checked for health, via HTTPS.

  • gcompute_health_check
    An HealthCheck resource. This resource defines a template for how
    individual virtual machines should be checked for health, via one of the
    supported protocols.

  • gcompute_instance_template
    Defines an Instance Template resource that provides configuration settings
    for your virtual machine instances. Instance templates are not tied to the
    lifetime of an instance and can be used and reused as to deploy virtual
    machines. You can also use different templates to create different virtual
    machine configurations. Instance templates are required when you create a
    managed instance group.
    Tip: Disks should be set to autoDelete=true
    so that leftover disks are not left behind on machine deletion.

  • gcompute_license
    A License resource represents a software license. Licenses are used to
    track software usage in images, persistent disks, snapshots, and virtual
    machine instances.

  • gcompute_image
    Represents an Image resource.
    Google Compute Engine uses operating system images to create the root
    persistent disks for your instances. You specify an image when you create
    an instance. Images contain a boot loader, an operating system, and a
    root file system. Linux operating system images are also capable of
    running containers on Compute Engine.
    Images can be either public or custom.
    Public images are provided and maintained by Google, open-source
    communities, and third-party vendors. By default, all projects have
    access to these images and can use them to create instances. Custom
    images are available only to your project. You can create a custom image
    from root persistent disks and other images. Then, use the custom image
    to create an instance.

  • gcompute_instance
    An instance is a virtual machine (VM) hosted on Google's infrastructure.

  • gcompute_instance_group
    Represents an Instance Group resource. Instance groups are self-managed
    and can contain identical or different instances. Instance groups do not
    use an instance template. Unlike managed instance groups, you must create
    and add instances to an instance group manually.

  • gcompute_instance_group_manager
    Creates a managed instance group using the information that you specify in
    the request. After the group is created, it schedules an action to create
    instances in the group using the specified instance template. This
    operation is marked as DONE when the group is created even if the
    instances in the group have not yet been created. You must separately
    verify the status of the individual instances.
    A managed instance group can have up to 1000 VM instances per group.

  • gcompute_machine_type
    Represents a MachineType resource. Machine types determine the virtualized
    hardware specifications of your virtual machine instances, such as the
    amount of memory or number of virtual CPUs.

  • gcompute_network
    Represents a Network resource.
    Your Cloud Platform Console project can contain multiple networks, and
    each network can have multiple instances attached to it. A network allows
    you to define a gateway IP and the network range for the instances
    attached to that network. Every project is provided with a default network
    with preset configurations and firewall rules. You can choose to customize
    the default network by adding or removing rules, or you can create new
    networks in that project. Generally, most users only need one network,
    although you can have up to five networks per project by default.
    A network belongs to only one project, and each instance can only belong
    to one network. All Compute Engine networks use the IPv4 protocol. Compute
    Engine currently does not support IPv6. However, Google is a major
    advocate of IPv6 and it is an important future direction.

  • gcompute_region
    Represents a Region resource. A region is a specific geographical
    location where you can run your resources. Each region has one or more
    zones

  • gcompute_route
    Represents a Route resource.
    A route is a rule that specifies how certain packets should be handled by
    the virtual network. Routes are associated with virtual machines by tag,
    and the set of routes for a particular virtual machine is called its
    routing table. For each packet leaving a virtual machine, the system
    searches that virtual machine's routing table for a single best matching
    route.
    Routes match packets by destination IP address, preferring smaller or more
    specific ranges over larger ones. If there is a tie, the system selects
    the route with the smallest priority value. If there is still a tie, it
    uses the layer three and four packet headers to select just one of the
    remaining matching routes. The packet is then forwarded as specified by
    the next_hop field of the winning route -- either to another virtual
    machine destination, a virtual machine gateway or a Compute
    Engine-operated gateway. Packets that do not match any route in the
    sending virtual machine's routing table will be dropped.
    A Routes resources must have exactly one specification of either
    nextHopGateway, nextHopInstance, nextHopIp, or nextHopVpnTunnel.

  • gcompute_snapshot
    Represents a Persistent Disk Snapshot resource.
    Use snapshots to back up data from your persistent disks. Snapshots are
    different from public images and custom images, which are used primarily
    to create instances or configure instance templates. Snapshots are useful
    for periodic backup of the data on your persistent disks. You can create
    snapshots from persistent disks even while they are attached to running
    instances.
    Snapshots are incremental, so you can create regular snapshots on a
    persistent disk faster and at a much lower cost than if you regularly
    created a full image of the disk.

  • gcompute_ssl_certificate
    An SslCertificate resource. This resource provides a mechanism to upload
    an SSL key and certificate to the load balancer to serve secure
    connections from the user.

  • gcompute_subnetwork
    A VPC network is a virtual version of the traditional physical networks
    that exist within and between physical data centers. A VPC network
    provides connectivity for your Compute Engine virtual machine (VM)
    instances, Container Engine containers, App Engine Flex services, and
    other network-related resources.
    Each GCP project contains one or more VPC networks. Each VPC network is a
    global entity spanning all GCP regions. This global VPC network allows VM
    instances and other resources to communicate with each other via internal,
    private IP addresses.
    Each VPC network is subdivided into subnets, and each subnet is contained
    within a single region. You can have more than one subnet in a region for
    a given VPC network. Each subnet has a contiguous private RFC1918 IP
    space. You create instances, containers, and the like in these subnets.
    When you create an instance, you must create it in a subnet, and the
    instance draws its internal IP address from that subnet.
    Virtual machine (VM) instances in a VPC network can communicate with
    instances in all other subnets of the same VPC network, regardless of
    region, using their RFC1918 private IP addresses. You can isolate portions
    of the network, even entire subnets, using firewall rules.

  • gcompute_target_http_proxy
    Represents a TargetHttpProxy resource, which is used by one or more global
    forwarding rule to route incoming HTTP requests to a URL map.

  • gcompute_target_https_proxy
    Represents a TargetHttpsProxy resource, which is used by one or more
    global forwarding rule to route incoming HTTPS requests to a URL map.

  • gcompute_target_pool
    Represents a TargetPool resource, used for Load Balancing.

  • gcompute_target_ssl_proxy
    Represents a TargetSslProxy resource, which is used by one or more
    global forwarding rule to route incoming SSL requests to a backend
    service.

  • gcompute_target_tcp_proxy
    Represents a TargetTcpProxy resource, which is used by one or more
    global forwarding rule to route incoming TCP requests to a Backend
    service.

  • gcompute_url_map
    UrlMaps are used to route requests to a backend service based on rules
    that you define for the host and path of an incoming URL.

  • gcompute_zone
    Represents a Zone resource.

Google Container Engine

Detailed information can be found at the
google-gcontainer project home page.
The list below is a summary of the supported types by the cookbook:

  • gcontainer_cluster
    A Google Container Engine cluster.

  • gcontainer_node_pool
    NodePool contains the name and configuration for a cluster's node pool.
    Node pools are a set of nodes (i.e. VM's), with a common configuration and
    specification, under the control of the cluster master. They may have a
    set of Kubernetes labels applied to them, which may be used to reference
    them during pod scheduling. They may also be resized up or down, to
    accommodate the workload.

  • gcontainer_kube_config
    Generates a compatible Kuberenetes '.kube/config' file

Google Cloud DNS

Detailed information can be found at the
google-gdns project home page.
The list below is a summary of the supported types by the cookbook:

  • gdns_managed_zone
    A zone is a subtree of the DNS namespace under one administrative
    responsibility. A ManagedZone is a resource that represents a DNS zone
    hosted by the Cloud DNS service.

  • gdns_project
    A project resource. The project is a top level container for resources
    including Cloud DNS ManagedZones.

  • gdns_resource_record_set
    A single DNS record that exists on a domain name (i.e. in a managed zone).
    This record defines the information about the domain and where the
    domain / subdomains direct to.
    The record will include the domain/subdomain name, a type (i.e. A, AAA,
    CAA, MX, CNAME, NS, etc)

Google Cloud SQL

Detailed information can be found at the
google-gsql project home page.
The list below is a summary of the supported types by the cookbook:

  • gsql_instance
    Represents a Cloud SQL instance. Cloud SQL instances are SQL databases
    hosted in Google's cloud. The Instances resource provides methods for
    common configuration and management tasks.

  • gsql_database
    Represents a SQL database inside the Cloud SQL instance, hosted in
    Google's cloud.

  • gsql_user
    The Users resource represents a database user in a Cloud SQL instance.

  • gsql_ssl_cert
    Represents an SSL certificate created for a Cloud SQL instance. To use the
    SSL certificate you must have the SSL Client Certificate and the
    associated SSL Client Key. The Client Key can be downloaded only when the
    SSL certificate is created with the insert method.

  • gsql_flag
    Represents a flag that can be configured for a Cloud SQL instance.

  • gsql_tier
    The Tiers resource represents a service configuration that can be used to
    define a Cloud SQL instance. Each tier has an associated RAM, maximum
    storage, and list of regions in which the tier can be used. Available
    tiers vary depending on whether you use PostgreSQL, MySQL Second
    Generation, or MySQL First Generation instances.

Google Cloud Storage

Detailed information can be found at the
google-gstorage project home page.
The list below is a summary of the supported types by the cookbook:

  • gstorage_bucket
    The Buckets resource represents a bucket in Google Cloud Storage. There is
    a single global namespace shared by all buckets. For more information, see
    Bucket Name Requirements.
    Buckets contain objects which can be accessed by their own methods. In
    addition to the acl property, buckets contain bucketAccessControls, for
    use in fine-grained manipulation of an existing bucket's access controls.
    A bucket is always owned by the project team owners group.

  • gstorage_bucket_access_control
    The BucketAccessControls resource represents the Access Control Lists
    (ACLs) for buckets within Google Cloud Storage. ACLs let you specify who
    has access to your data and to what extent.
    There are three roles that can be assigned to an entity:
    READERs can get the bucket, though no acl property will be returned, and
    list the bucket's objects. WRITERs are READERs, and they can insert
    objects into the bucket and delete the bucket's objects. OWNERs are
    WRITERs, and they can get the acl property of a bucket, update a bucket,
    and call all BucketAccessControls methods on the bucket. For more
    information, see Access Control, with the caveat that this API uses
    READER, WRITER, and OWNER instead of READ, WRITE, and FULL_CONTROL.

Google Stackdriver Logging

Detailed information can be found at the
google-glogging project home page.

Google Authentication

This cookbook provides the types to authenticate with Google Cloud Platform.
When executing operations on Google Cloud Platform, e.g. creating a virtual
machine, a SQL database, etc., you need to be authenticated to be able to carry
on with the request. All Google Cloud Platform cookbooks use an unified
authentication mechanism, provided by this cookbook.

For examples, installation and usage visit the google-gauth cookbook home
page.

Supported Operating Systems

<table>
<tr><th>Product</th><th>Operating Systems</th></tr>
<tr>
<td>Google Compute Engine</td>
<td>
RedHat 6, 7<br/>
CentOS 6, 7<br/>
Debian 7, 8<br/>
Ubuntu 12.04, 14.04, 16.04, 16.10<br/>
SLES 11-sp4, 12-sp2<br/>
openSUSE 13<br/>
Windows Server 2008 R2, 2012 R2, 2012 R2 Core, 2016 R2, 2016 R2 Core
</td>
</tr>
<tr>
<td>Google Container Engine</td>
<td>
RedHat 6, 7<br/>
CentOS 6, 7<br/>
Debian 7, 8<br/>
Ubuntu 12.04, 14.04, 16.04, 16.10<br/>
SLES 11-sp4, 12-sp2<br/>
openSUSE 13<br/>
Windows Server 2008 R2, 2012 R2, 2012 R2 Core, 2016 R2, 2016 R2 Core
</td>
</tr>
<tr>
<td>Google Cloud DNS</td>
<td>
RedHat 6, 7<br/>
CentOS 6, 7<br/>
Debian 7, 8<br/>
Ubuntu 12.04, 14.04, 16.04, 16.10<br/>
SLES 11-sp4, 12-sp2<br/>
openSUSE 13<br/>
Windows Server 2008 R2, 2012 R2, 2012 R2 Core, 2016 R2, 2016 R2 Core
</td>
</tr>
<tr>
<td>Google Cloud SQL</td>
<td>
RedHat 6, 7<br/>
CentOS 6, 7<br/>
Debian 7, 8<br/>
Ubuntu 12.04, 14.04, 16.04, 16.10<br/>
SLES 11-sp4, 12-sp2<br/>
openSUSE 13<br/>
Windows Server 2008 R2, 2012 R2, 2012 R2 Core, 2016 R2, 2016 R2 Core
</td>
</tr>
<tr>
<td>Google Cloud Storage</td>
<td>
RedHat 6, 7<br/>
CentOS 6, 7<br/>
Debian 7, 8<br/>
Ubuntu 12.04, 14.04, 16.04, 16.10<br/>
SLES 11-sp4, 12-sp2<br/>
openSUSE 13<br/>
Windows Server 2008 R2, 2012 R2, 2012 R2 Core, 2016 R2, 2016 R2 Core
</td>
</tr>
</table>

Dependent cookbooks

google-gauth < 0.2.0
google-glogging < 0.2.0
google-gcompute < 0.2.0
google-gcontainer < 0.2.0
google-gdns < 0.2.0
google-gsql < 0.3.0
google-gstorage < 0.2.0

Contingent cookbooks

There are no cookbooks that are contingent upon this one.

Changelog

0.2.0 (2018-03-16)

New features

  • Added google-glogging cookbook.

0.1.0 (2017-10-04)

Initial release

Collaborator Number Metric
            

0.2.0 failed this metric

Failure: Cookbook has 0 collaborators. A cookbook must have at least 2 collaborators to pass this metric.

Contributing File Metric
            

0.2.0 passed this metric

Foodcritic Metric
            

0.2.0 failed this metric

FC066: Ensure chef_version is set in metadata: google-cloud/metadata.rb:1
FC069: Ensure standardized license defined in metadata: google-cloud/metadata.rb:1
Run with Foodcritic Version 13.1.1 with tags metadata,correctness ~FC031 ~FC045 and failure tags any

No Binaries Metric
            

0.2.0 passed this metric

Testing File Metric
            

0.2.0 failed this metric

Failure: To pass this metric, your cookbook metadata must include a source url, the source url must be in the form of https://github.com/user/repo, and your repo must contain a TESTING.md file

Version Tag Metric
            

0.2.0 failed this metric

Failure: To pass this metric, your cookbook metadata must include a source url, the source url must be in the form of https://github.com/user/repo, and your repo must include a tag that matches this cookbook version number