Adoptable Cookbooks List

Looking for a cookbook to adopt? You can now see a list of cookbooks available for adoption!
List of Adoptable Cookbooks

Supermarket Belongs to the Community

Supermarket belongs to the community. While Chef has the responsibility to keep it running and be stewards of its functionality, what it does and how it works is driven by the community. The chef/supermarket repository will continue to be where development of the Supermarket application takes place. Come be part of shaping the direction of Supermarket by opening issues and pull requests or by joining us on the Chef Mailing List.

Select Badges

Select Supported Platforms

Select Status

RSS

dellos10-cookbook (1) Versions 1.0.0

This cookbook enables management of supported Dell OS10 using Chef.

Policyfile
Berkshelf
Knife
cookbook 'dellos10-cookbook', '~> 1.0.0', :supermarket
cookbook 'dellos10-cookbook', '~> 1.0.0'
knife supermarket install dellos10-cookbook
knife supermarket download dellos10-cookbook
README
Dependencies
Quality 33%

dellos10-cookbook

![Cookbook Release]

--

Table of Contents

  1. Overview
  2. Cookbook Description
  3. Setup
  4. Usage
  5. Requirements
  6. Resource Reference

Overview

The dellos10-cookbook allows a network administrator to manage Dell OS10 switch using Chef. This cookbook bundles a set of Chef Resources, Sample Recipes and installation Tools for effective network management. The resources and capabilities provided by this cookbook will grow with contributions from Dell, Chef Software Inc., and the open source community.
The Chef Requirements section provides details on compatible Chef client.

This GitHub repository contains the latest version of the dellos10-cookbook source code. Supported versions of the dellos10-cookbook are available at Chef Supermarket. Please refer to [SUPPORT] for additional details.

Contributions to this cookbook are welcome. Guidelines on contributions to the cookbook are captured in [CONTRIBUTING]

Cookbook Description

This cookbook enables management of supported Dell OS10 using Chef. This cookbook enhances the Chef DSL by introducing new Chef Resources capable of managing network elements.

Setup

Chef Server

The dellos10-cookbook is installed on the Chef server. Please see The Chef Server for information on Chef server setup. See Chef's knife cookbook site for general information on Chef cookbook installation.

Chef Client

The Chef Client (agent) requires installation and setup on each device. Agent setup can be performed as a manual process or it may be automated. For more information please see the [README-agent-install] document for detailed instructions on agent installation and configuration on Dell OS10 devices.

Gems

The dellos10-cookbook has dependencies on a few ruby gems. These gems are already installed in the cookbook as vendored gems so there are no additional steps required for installing these gems. The gems are shown here for reference only:

Usage

Place a dependency on dellos10-cookbook in your cookbook's metadata.rb

depends 'dellos10-cookbook', '~> 1.0'

See the recipes directory for example usage of dellos10 providers and resources.

Requirements

Chef Requirements

Dell OS10 Chef implementation requires Chef version 12.6.0

Resource Reference

Resource Details

The following resources are listed alphabetically.

Type: dellos10_bgp

The dellos10_bgp resource is used to manage global parameters of BGP protocol.

Minimum Requirements OS10
OS Image 10.4
Dell OS10 Cookbook Version 1.0.0

Examples

bgp 'default' do
 asn_num '200'
 router_id '4.4.4.4'
 maxpath_ibgp '73'
 maxpath_ebgp '91'
 bestpath_as_path 'multipath-relax'
 bestpath_med_confed true
 bestpath_med_missing_as_worst true
 bestpath_ignore_router_id true
 outbound_optimization false
 fast_ext_fallover false
 log_neighbor_changes false
 action :create
end

bgp 'default' do
 asn_num '200'
 action :delete
end

Parameters

Property Type Description
asn_num String The Autonomous system number. The value should be 0.1..65535.65535 or 1..4294967295*
router_id String Override configured router identifier
maxpath_ibgp String Forward packets over multiple paths for IBGP. The value should be between 1-128 with default value 64*
maxpath_ebgp String Forward packets over multiple paths for EBGP. The value should be between 1-128 with default value 64*
bestpath_as_path String AS path for best path computation. This property can take ignore or multipath-relax as options
bestpath_med_confed boolean bestpath selection for MED attribute. Compare MED among confederation paths
bestpath_med_missing_as_worst boolean bestpath selection for MED attribute.Treat missing MED as the least preferred one
bestpath_ignore_router_id boolean Router identifier for best path computation
outbound_optimization boolean Enables outbound optimization for IBGP Peer-group members
fast_ext_fallover boolean Immediately reset session if a link to a directly connected external peer goes down(default)
log_neighbor_changes boolean Log neighbor up/down and reset reason(default)

Actions

  • :create - Creates or updates the BGP global properties.
  • :Delete - Deletes the BGP global properties.
* The Integer values should be entered in string format

Type: dellos10_bgp_af

The dellos10_bgp_af resource is used to manage global address family parameters of BGP protocol.

Minimum Requirements OS10
OS Image 10.4
Dell OS10 Cookbook Version 1.0.0

Examples

bgp_af 'ipv4-unicast' do
 asn_num '200'
 address_family 'ipv4-unicast'
 default_metric '300'
 redistribute_connected ({enable:true, 'route-map':'t7'})
 redistribute_static ({enable:true, 'route-map':'t8'})
 redistribute_ospf ({id:20, 'route-map':'t9'})
 network_add_list [ {:prefix=>'2.2.2.2/24', :'route-map'=>'t9'},  {:prefix=>'3.3.3.3/24', :'route-map'=>'t9'}]
 action :create
end

bgp_af 'ipv4-unicast' do
 asn_num '200'
 address_family 'ipv4-unicast'
 action :delete
end

Parameters

Property Type Description
asn_num String The Autonomous system number. The value should be 0.1..65535.65535 or 1..4294967295*
address_family String The address family mode. It will take ipv4 or ipv6 unicast
default_metric String Set metric of redistributed routes. The value should be between 1-4294967295*
redistribute_connected Hash Redistribute Connected Routes. The hash contains enable and route-map. The enable key is mandatory
redistribute_static Hash Redistribute Static Routes. The hash contains enable and route-map. The enable key is mandatory
redistribute_ospf Hash Redistribute OSPF Routes. The hash contains ospf ID and route map. The ospf ID is mandatory. The OSPF instance or ID should be created before executing this property
network_add_list Array of Hash Enable routing on an IP network. Each hash in the array contains network address and route map. The network address is mandatory parameter

Actions

  • :create - Creates or updates the BGP address family properties.
  • :Delete - Deletes the BGP address family properties.
* The Integer values should be entered in string format

Type: dellos10_bgp_nbr

The dellos10_bgp_nbr resource is used to manage neighbor configuration of BGP protocol.

Minimum Requirements OS10
OS Image 10.4
Dell OS10 Cookbook Version 1.0.0

Examples

bgp_nbr '9.9.9.9' do
 asn_num '200'
 advertisement_interval '600'
 advertisement_start '50'
 timers ({keepalive: 50, hold_time: 70})
 connection_retry_timer '70'
 remote_as '300'
 remove_private_as true
 shutdown false
 password 'devops'
 send_community_ext true
 send_community_std true 
 associate_peer_group 'tr1'
 address_family 'ipv4-unicast'
 allowas_in '10'
 action :create
end

bgp_nbr '9.9.9.9' do
 asn_num '200'
 address_family 'ipv4-unicast'
 action :delete
end

Parameters

Property Type Description
asn_num String The Autonomous system number. The value should be 0.1..65535.65535 or 1..4294967295*
peer_config String Neighbor router address
advertisement_interval String Minimum interval between sending BGP routing updates. The value should be between 1-600 with default value 30*
advertisement_start String Delay initiating OPEN message for the specified time. The value should be between 0-240*
timer Hash Adjust routing timers keepalive and holdtime value. The Hash contains keepalive and holdtimer value. The keepalive value should be between 1-65535 with default value is 60. The hold timer should be between 3-65535 with default value of 180. The values are of type Integer.
connection_retry_timer String Peer connection retry timer. The value should be between 10-65535 with default default of 60*
remote_as String AS of remote BGP neighbor. The value should be 0.1..65535.65535 or 1..4294967295*
remove_private_as Boolean Remove private AS number from outbound updates
shutdown Boolean Enable r disable the neighbor
password String Set password
send_community_ext Boolean Neighbor's extended community attribute
send_community_std Boolean Neighbor's standard community attribute
associate_peer_group String Inherit configuration of peer-group. The peer group property should be confirgured first before configuring this property
address_family String The address family mode. It will take ipv4 or ipv6 unicast
allowas_in String Allow local AS number in as-path. The value should be between 1-10*
af_activate Boolean Enable the Address Family for this Neighbor

Actions

  • :create - Creates or updates the BGP neighbor properties.
  • :Delete - Deletes the BGP neighbor properties or address family of BGP neighbor.
* The Integer values should be entered in string format

Type: dellos10_bgp_nbr_group

The dellos10_bgp_nbr_group resource is used to manage template configuration of BGP protocol.

Minimum Requirements OS10
OS Image 10.4
Dell OS10 Cookbook Version 1.0.0

Examples

bgp_nbr_group 'tr1' do
 asn_num '200'
 advertisement_interval '600'
 advertisement_start '50'
 timers ({keepalive: 50, hold_time: 70})
 connection_retry_timer '70'
 remote_as '300'
 remove_private_as true
 password 'devops'
 send_community_ext true
 send_community_std true
 address_family 'ipv4-unicast'
 no acivate
 action :create
end

bgp_nbr_group 'tr1' do
 asn_num '200'
 address_family 'ipv4-unicast'
 action :delete
end

Parameters

Property Type Description
asn_num String The Autonomous system number. The value should be 0.1..65535.65535 or 1..4294967295*
peer_group_config String template name
advertisement_interval String Minimum interval between sending BGP routing updates. The value should be between 1-600 with default value 30*
advertisement_start String Delay initiating OPEN message for the specified time. The value should be between 0-240*
timer Hash Adjust routing timers keepalive and holdtime value. The Hash contains keepalive and holdtimer value. The keepalive value should be between 1-65535 with default value is 60. The hold timer should be between 3-65535 with default value of 180. The values are of type Integer.
connection_retry_timer String Peer connection retry timer. The value should be between 10-65535 with default default of 60*
remote_as String AS of remote BGP neighbor. The value should be 0.1..65535.65535 or 1..4294967295*
remove_private_as Boolean Remove private AS number from outbound updates
password String Set password
send_community_ext Boolean Neighbor's extended community attribute
send_community_std Boolean Neighbor's standard community attribute
address_family String The address family mode. It will take ipv4 or ipv6 unicast
af_activate Boolean Enable the Address Family for this Neighbor

Actions

  • :create - Creates or updates the BGP template properties.
  • :Delete - Deletes the BGP template properties or address familty of BGP template.
* The Integer values should be entered in string format

Type: dellos10_interface

The dellos10_interface resource is used to manage general configuration of all
interface types, including ethernet, port-channel, loopback, and vlan.

Minimum Requirements OS10
OS Image 10.4
Dell OS10 Cookbook Version 1.0.0

Examples

os10_interface 'ethernet 1/1/5' do
desc "ie5"
portmode "trunk"
mtu "1500"
switchport_mode true
admin "up"
ip_and_mask "1.1.1.1/24"
suppress_ra true
ipv6_and_mask "2001:db8:85a3::8a2e:370:7334/32"
state_ipv6  "cde"
ip_helper ["1.1.1.2", "1.1.1.13"]
end

Parameters

  • interface_name -string -The interface name, in lower case. Defaults to the resource name.
  • desc -string Configures a single line interface description
  • portmode -string Configures port-mode according to the device type
  • switchport -boolean Configures an interface in L2 mode
  • admin -string Configures the administrative state for the interface; configuring the value as administratively "up" enables the interface; configuring the value as administratively "down" disables the interface
  • mtu -integer Configures the MTU size for L2 and L3 interfaces; example, MTU range is 1280 to 65535 on dellos10 devices
  • suppress_ra -boolean Configures IPv6 router advertisements if set to present
  • ip_and_mask -string Configures the specified IP address to the interface on dellos9 and dellos10 devices; configures the specified IP address to the interface VLAN on dellos6 devices (192.168.11.1/24 format)
  • ipv6_and_mask -string Configures a specified IPv6 address to the interface; configures a specified IP address to the interface VLAN on dellos6 devices (2001:4898:5808:ffa2::1/126 format)
  • state_ipv6 -string present or absent, deletes the IPV6 address if set to absent
  • ip_helper -Array Configures DHCP server address objects (IPv4 address of the DHCP server)

Actions

  • :create - updates the interface configuration. It is default action, so optional to provide in recipe.

Note
physical interfaces (Ethernet, etc.) can only be configured/unconfigured.

Type: dellos10_lldp

The dellos10_lldp resource is used to manage general configuration of lldp

Minimum Requirements OS10
OS Image 10.4
Dell OS10 Cookbook Version 1.0.0

Examples

os10_lldp "lldp_conf" do
enable true
holdtime_multiplier "7"
reinit "5"
timer "80"
med_fast_start_repeat_count "5"
med_network_policy [{"id"=>"2", "app"=>"voice", "vlan"=>"3", "vlan-type"=> "tag", "priority"=>"3", "dscp"=>"4"}]
end

Parameters

-enable -boolean Enables or disables LLDP at a global level
-multiplier -string Configures the LLDP multiplier (2 to 10)

-'reinit-string Configures the reinit value (1-10)
-
timer-string Configures the timer value (5-254)
-
med_fast_start_repeat_count-string Configures med fast start repeat count
-
med_network_policy` -hash Network policy parameters

Actions

  • :set - updates the global lldp configuration. It is default action, so optional to provide in recipe.

Type: dellos10_lldp_interface

The dellos10_lldp_interface resource is used to manage general configuration of lldp interface

Minimum Requirements OS10
OS Image 10.4
Dell OS10 Cookbook Version 1.0.0

Examples

os10_lldp_interface 'ethernet 1/1/1' do
receive true
transmit true
med true
med_network_policy ["7","8"]
med_tlv_select_inventory true
med_tlv_select_network_policy true
tlvselect ({"dcbxp"=>[""],"dot1tlv"=>["link-aggregation"], "dot3tlv"=>["max-framesize", "macphy-config"]})
end

Parameters

-interface_name -string The interface name, in lower case. Defaults to the
resource name.
-receive -boolean Configures receive at the interface level
-transmit -boolean Configures transmit at the interface level.
-med -boolean Configures MED at the interface level
-med_network_policy -Array Configures the network policy id for the application of MED
-med_tlv_select_inventory -boolean Configures tlv inventory at the interface level
-med_tlv_select_network_policy -boolean Configures tlv network policy at the interface level
-tlvselect -hash Disabled capabilities,by default capabilities are enabled. To disable provide values in hash
whose key,value will be below values. Provide any or all values.
basic-tlv => ["management-address", "port-description", "system-capabilities", "system-description", "system-name"]
dcbxp => ""
dcbxp-appln => ["iscsi", "fcoe"]
dot3tlv => ["macphy-config", "max-framesize"]
dot1tlv => ["link-aggregation", "port-vlan-id"]
Actions

  • :set - updates the interface lldp configuration. It is default action, so optional to provide in recipe. ~

Type: dellos10_portmonitoring

The dellos10_portmonitoring resource is used to manage general configuration of port monitoring session.

Minimum Requirements OS10
OS Image 10.4
Dell OS10 Cookbook Version 1.0.0

Examples

os10_portmonitoring "2" do
source ["ethernet1/1/1","ethernet1/1/5"]
flowbase true
shutdown true
action :create
end

Parameters

-port_id -String port monitoring session id. Defaults to the
resource name.
-'source-Array Configures the source of an interface
-
destination-String Configures the destination of an interface
-
flowbase-boolean Enables flow-based monitoring
-
shutdown` -boolean Enable/disables the monitoring session

Actions

  • :create - creates and updates the port monitoring configuration. It is default action, so optional to provide in recipe.
  • :delete - delete the port monitoring session. ~

Type: dellos10_route

The dellos10_route resource is used to manage general configuration of route.

Minimum Requirements OS10
OS Image 10.4
Dell OS10 Cookbook Version 1.0.0

Examples

os10_route '4.4.4.4/32' do
next_hop ["interface ethernet 1/1/6 10.10.10.10", "20.20.20.20"]
action :create
end

Parameters

-route_ip -String route ip. Defaults to the resource name.
-'next_hop` -Array Configures the next hop

Actions

  • :create - creates and updates the route configuration. It is default action, so optional to provide in recipe.
  • :delete - delete the route.

Type: dellos10_snmp

The dellos10_snmp resource is used to manage general configuration of snmp.

Minimum Requirements OS10
OS Image 10.4
Dell OS10 Cookbook Version 1.0.0

Examples

os10_snmp "snmp_conf" do
location "aaa"
contact  "abc"
community ["private"]
trap []
host [{"version"=>"1", "community"=>"public","ip"=>"2.2.2.2", "port"=>"162"},{"community" => "public", "ip"=>"1.1.1.1","port"=>"162", "version"=>"2c"}]
end

Parameters

-location -String Configures SNMP location information
-'contact-String Configures SNMP contact information
-
community-Array Configures SNMP community information
-
trap-[Array, Hash] Configures SNMP traps ["envmon"=>"fan","envmon"=>"power-supply","envmon"=>"temperature",
"snmp"=>"authentication","snmp"=>"linkdown","snmp"=>"linkup","snmp"=>"coldstart","snmp"=>"warmstart"]
-
host` -[Array, Hash] Configures SNMP hosts to receive SNMP traps
Actions

  • :set - updates the snmp configuration. It is default action, so optional to provide in recipe.

Dependent cookbooks

This cookbook has no specified dependencies.

Contingent cookbooks

There are no cookbooks that are contingent upon this one.

Collaborator Number Metric
            

1.0.0 passed this metric

Contributing File Metric
            

1.0.0 failed this metric

Failure: To pass this metric, your cookbook metadata must include a source url, the source url must be in the form of https://github.com/user/repo, and your repo must contain a CONTRIBUTING.md file

Foodcritic Metric
            

1.0.0 failed this metric

FC092: Custom resources should not define actions: dellos10-cookbook/resources/os10_bgp.rb:36
FC092: Custom resources should not define actions: dellos10-cookbook/resources/os10_bgp_af.rb:37
FC092: Custom resources should not define actions: dellos10-cookbook/resources/os10_bgp_nbr.rb:40
FC092: Custom resources should not define actions: dellos10-cookbook/resources/os10_bgp_nbr_group.rb:37
FC117: Do not use kind_of in custom resource properties: dellos10-cookbook/resources/os10_bgp.rb:38
FC117: Do not use kind_of in custom resource properties: dellos10-cookbook/resources/os10_imageupgrade.rb:21
FC117: Do not use kind_of in custom resource properties: dellos10-cookbook/resources/os10_interface.rb:34
FC117: Do not use kind_of in custom resource properties: dellos10-cookbook/resources/os10_interface.rb:37
FC117: Do not use kind_of in custom resource properties: dellos10-cookbook/resources/os10_lldp.rb:26
FC117: Do not use kind_of in custom resource properties: dellos10-cookbook/resources/os10_lldp_interface.rb:28
FC117: Do not use kind_of in custom resource properties: dellos10-cookbook/resources/os10_lldp_interface.rb:29
FC117: Do not use kind_of in custom resource properties: dellos10-cookbook/resources/os10_lldp_interface.rb:30
FC117: Do not use kind_of in custom resource properties: dellos10-cookbook/resources/os10_lldp_interface.rb:32
FC117: Do not use kind_of in custom resource properties: dellos10-cookbook/resources/os10_lldp_interface.rb:33
FC117: Do not use kind_of in custom resource properties: dellos10-cookbook/resources/os10_lldp_interface.rb:34
FC117: Do not use kind_of in custom resource properties: dellos10-cookbook/resources/os10_portmonitoring.rb:24
FC117: Do not use kind_of in custom resource properties: dellos10-cookbook/resources/os10_portmonitoring.rb:25
FC117: Do not use kind_of in custom resource properties: dellos10-cookbook/resources/os10_portmonitoring.rb:26
FC117: Do not use kind_of in custom resource properties: dellos10-cookbook/resources/os10_route.rb:29
FC117: Do not use kind_of in custom resource properties: dellos10-cookbook/resources/os10_route.rb:30
FC117: Do not use kind_of in custom resource properties: dellos10-cookbook/resources/os10_snmp.rb:25
FC117: Do not use kind_of in custom resource properties: dellos10-cookbook/resources/os10_snmp.rb:26
FC117: Do not use kind_of in custom resource properties: dellos10-cookbook/resources/os10_snmp.rb:27
FC117: Do not use kind_of in custom resource properties: dellos10-cookbook/resources/os10_snmp.rb:28
FC117: Do not use kind_of in custom resource properties: dellos10-cookbook/resources/os10_snmp.rb:29
Run with Foodcritic Version 16.3.0 with tags metadata,correctness ~FC031 ~FC045 and failure tags any

No Binaries Metric
            

1.0.0 passed this metric

Testing File Metric
            

1.0.0 failed this metric

Failure: To pass this metric, your cookbook metadata must include a source url, the source url must be in the form of https://github.com/user/repo, and your repo must contain a TESTING.md file

Version Tag Metric
            

1.0.0 failed this metric

Failure: To pass this metric, your cookbook metadata must include a source url, the source url must be in the form of https://github.com/user/repo, and your repo must include a tag that matches this cookbook version number