Adoptable Cookbooks List

Looking for a cookbook to adopt? You can now see a list of cookbooks available for adoption!
List of Adoptable Cookbooks

Supermarket Belongs to the Community

Supermarket belongs to the community. While Chef has the responsibility to keep it running and be stewards of its functionality, what it does and how it works is driven by the community. The chef/supermarket repository will continue to be where development of the Supermarket application takes place. Come be part of shaping the direction of Supermarket by opening issues and pull requests or by joining us on the Chef Mailing List.

Select Badges

Select Supported Platforms

RSS

chef-ibmc-cookbook (4) Versions 1.1.0

Configure Huawei iBMC

Berkshelf
Policyfile
Knife
cookbook 'chef-ibmc-cookbook', '~> 1.1.0'
cookbook 'chef-ibmc-cookbook', '~> 1.1.0', :supermarket
knife supermarket install chef-ibmc-cookbook
knife supermarket download chef-ibmc-cookbook
README
Dependencies
Changelog
Quality 38%

chef-ibmc-cookbook Cookbook

This cookbook provides resources for configuring Huawei iBMC via their APIs. Included resources:

  • BIOS Management(ibmc_bios)
  • Inband Firmware Management(ibmc_firmware_inband)
  • Outband Firmware Management(ibmc_firmware_outband)
  • System Health Management
    • CPU Health(ibmc_health_cpu)
    • Drive Health(ibmc_health_drive)
    • Fan Health(ibmc_health_fan)
    • Memory Health(ibmc_health_memory)
    • Power Supply Health(ibmc_health_psu)
    • RAID Health(ibmc_health_raid)
    • Network Adapter Health(ibmc_health_network_adapter)
  • Indicator State of Chassis Management(ibmc_indicator_led)
  • License Management(ibmc_license)
  • DNS Management(ibmc_ethernet_dns)
  • IPv4 Network Management(ibmc_ethernet_ipv4)
  • IPv6 Network Management(ibmc_ethernet_ipv6)
  • IP Version Management(ibmc_ethernet_ipversion)
  • VLAN Management(ibmc_ethernet_vlan)
  • Manager Ethernet Interface Management(ibmc_ethernet)
  • NTP Service Management(ibmc_ntp)
  • Boot Management(ibmc_boot)
  • CPU Management(ibmc_cpu)
  • Physical Disk Management(ibmc_drive)
  • OS Ethernet Information Management(ibmc_os_eth)
  • Memory Management(ibmc_memory)
  • OS Power Management(ibmc_sys_power)
  • Product Information Management(ibmc_system)
  • RAID Information Management(ibmc_raid)
  • Network Adapter Management(ibmc_network_adapter)
  • OS Management(ibmc_os_deploy)
  • BMC Power Management(ibmc_restart)
  • Network Service Management(ibmc_service)
  • SMTP Service Management(ibmc_smtp)
  • SMTP Recipient Management(ibmc_smtp_recipient)
  • SNMP Service Management(ibmc_snmp)
  • SP Service Management(ibmc_sp)
  • SP Firmware Management(ibmc_sp_firmware)
  • User Management(ibmc_user)
  • Virtual Media Management(ibmc_vmm)

Requirements

Platforms

  • Ubuntu 14.04+
  • CentOS 7.3+

ENV

  • python 2.7

Chef

  • Chef 13.0+

Cookbooks

  • none

How to use the iBMC Cookbook:

This cookbook is not intended to include any recipes. Use it by specifiying a dependency on this cookbook in your own cookbook.

# my_cookbook/metadata.rb
...
depends 'chef-ibmc-cookbook'

Credentials

In order to use iBMC API, authentication credential needs to be present. Remember to add sensitive attribute to chef resource to avoid chef displaying credential when resource failed.

All iBMC custom resources have iBMC credential properties: - ibmc_host: String, iBMC host address (IPv4, IPv6, domain) - ibmc_port: Integer, iBMC port - ibmc_username: String, iBMC username - ibmc_password: String, iBMC password

ibmc_bios 'get bios' do
  sensitive true
  ibmc_host 'ibmc-host'
  ibmc_port 443
  ibmc_username 'ibmc-user'
  ibmc_password 'ibmc-pass'
  attribute 'bios-attribute'
  action :get
end

Resources

All resource has no default action, so action must be set explicitly.

ibmc_bios

Manage BIOS

Actions:

  • get: Get BIOS information.

    • Properties:
    • attribute: String. Required.

    BIOS attribute.

  • set: Set BIOS attributes.

    • Properties:
    • attribute: String. Required.

    BIOS attribute. - value: String. Required.

    BIOS attribute value.

  • restore: Restore BIOS default settings.

Examples:

ibmc_bios 'get' do
  attribute 'attribute-name'
  action :get
end

ibmc_firmware_inband

Get inband firmware infomation. Only V5 servers used with BIOS version later than 0.39 support this function.

Actions:

  • get: Get inband firmwares.

    • Properties:

    None

  • upgrade: Upgrade inband firmware.

    Those transfered firmwares takes effect upon next system restart when SP Service start is enabled. Only V5 servers used with BIOS version later than 0.39 support this function.

    • Properties:
    • image_uri: String. Required.

    File URI of firmware update image file. The firmware upgrade file should be .zip format. It supports HTTPS, SFTP, NFS, CIFS, SCP file transfer protocols. The URI cannot contain the following special characters: ||, ;, &&, $, |, >>, >, <.

    For examples: - remote path: protocol://username:password@hostname/directory/Firmware.zip - signature_uri: String. Required.

    File path of the certificate file of the upgrade file. - Signal file should be in .asc format. - it supports HTTPS, SFTP, NFS, CIFS, SCP file transfer protocols. - The URI cannot contain the following special characters: ||, ;, &&, $, |, >>, >, <

    For examples: - remote path: protocol://username:password@hostname/directory/Firmware.zip.asc - parameter: String. Required.

    Only supports all for now. all indicates the entire upgrade package or a specific upgrade package (for example package1.rpm). - mode: String. Required.

    Mode of the upgrade. Value could be Auto, Full, Recover, APP or Driver. - active_method: String. Required.

    How does the upgrade take effect. Only supports OSRestart for now.

Examples:

ibmc_firmware_inband 'get' do
  action :get
end

ibmc_firmware_inband 'upgrade' do
  image_uri 'image URI'
  signature_uri 'signature URI'
  parameter 'all'
  mode 'Auto'
  active_method 'OSRestart'
  action :upgrade
end

ibmc_firmware_outband

Manage outband firmware. if upgrade CPLD and BIOS, it takes effect on next OS power off.

Actions:

  • get: Get outband firmware infomation.

    • Properties:

    None

  • upgrade: Upgrade outband firmware.

    • Properties:
    • image_uri: String.

    File URI of firmware update image file. File URI should be a string of up to 256 characters. It supports HTTPS, SCP, SFTP, CIFS, NFS transfer protocols and local file.

    For examples: - local path: /home/ubuntu/2288H_V5_5288_V5-iBMC-V318.hpm - remote path: protocol://username:password@hostname/directory/2288H_V5_5288_V5-iBMC-V318.hpm

Examples:

ibmc_firmware_outband 'get' do
  action :get
end

ibmc_firmware_outband 'upgrade' do
  image_uri 'image_uri'
  action :upgrade
end

ibmc_health_cpu

Manage CPU health

Actions:

  • get: Get CPU health.

    • Properties:

    None

Examples:

ibmc_health_cpu 'get' do
  action :get
end

ibmc_health_drive

Manage drive health

Actions:

  • get: Get drive health.

Examples:

ibmc_health_drive 'get' do
  action :get
end

ibmc_health_fan

Manage fan health

Actions:

  • get: Get fan health.

    • Properties:

    None

Examples:

ibmc_health_fan 'get' do
  action :get
end

ibmc_health_memory

Manage memory health

Actions:

  • get: Get memory health.

    • Properties:

    None

Examples:

ibmc_health_memory 'get' do
  action :get
end

ibmc_health_psu

Manage power supply health

Actions:

  • get: Get power supply health.

    • Properties:

    None

Examples:

ibmc_health_psu 'get' do
  action :get
end

ibmc_health_raid

Manage RAID health

Actions:

  • get: Get RAID health.

    • Properties:

    None

Examples:

ibmc_health_raid 'get' do
  action :get
end

ibmc_health_network_adapter

Manage network adapter health

Actions:

  • get: Get network adapter health.

    • Properties:

    None

Examples:

ibmc_health_network_adapter 'get' do
  action :get
end

ibmc_indicator_led

Manage indicator state of chassis

Actions:

  • set: Set indicator state of chassis.

    • Properties:
    • state: String. Required.

    Indicator state of chassis. Value could be Lit, Off or Blinking.

Examples:

ibmc_indicator_led 'light up' do
  state 'Lit'
  action :set
end

ibmc_license

Manage iBMC license

Actions:

  • get: Get license information.

    • Properties:

    None

  • install: Install license.

V3 servers and some V5 servers do not support this function. For details, see the iBMC User Guide.

  • Properties:

    • source: String. Default iBMC. Required.

    License source. Value could be iBMC, FusionDirector or eSight. - type: String. Required.

    Content type. Only URI is support for now. - content: String. Required.

    XML format license file URI. It supports HTTPS, SFTP, NFS, SCP, CIFS transfer protocols and local file.

    For examples: - local path: /home/ubuntu/license.xml - remote path: protocol://username:password@hostname/directory/license.xml - export: Export license.

  • Properties:

    • export_to: String. Required.

    The license file URI to be export to. Export to file path could be local path URI, or remote path URI (protocols HTTPS, SFTP, NFS, CIFS, and SCP are supported).

    For examples: - local path: /home/ubuntu/license.xml - remote path: protocol://username:password@hostname/directory/license.xml - delete: Delete license.

  • Properties:

    None

Examples:

ibmc_license 'get' do
  action :get
end

ibmc_license 'install' do
  type 'URI'
  content 'License URI'
  action :install
end

ibmc_license 'export' do
  export_to 'export to URI'
  action :export
end

ibmc_license 'delete' do
  action :delete
end

ibmc_ethernet_dns

Manage DNS

Actions:

  • set: Set DNS information.

    • Properties:
    • address_origin: String.

    How DNS server information is obtained. Value coule be Static, IPv4 or IPv6. - hostname: String.

    iBMC hostname. - domain: String.

    Server domain. - preferred_server: String.

    IP address of the preferred DNS server. - alternate_server: String.

    IP address of the alternate DNS server.

Examples:

ibmc_ethernet_dns 'set' do
  address_origin 'Static'
  action :set
end

ibmc_ethernet_ipv4

Manage IPv4 Network

Actions:

  • set: Set IPv4 network.

    • Properties:
    • address: String.

    IPv4 address of the iBMC network port. - origin: String.

    How the IPv4 address is allocated. Value could be Static or DHCP. - gateway: String.

    Gateway IPv4 address of the iBMC network port. - mask: String.

    Subnet mask of the iBMC network port.

Examples:

ibmc_ethernet_ipv4 'set' do
  address '10.10.10.2'
  origin 'Static'
  gateway '10.10.10.1'
  mask '255.255.255.0'
  action :set
end

ibmc_ethernet_ipv6

Manage IPv6 Network

Actions:

  • set: Set IPv6 network.

    • Properties:
    • address: String.

    IPv6 address of the iBMC network port. - origin: String.

    How the IPv6 address is allocated. Value could be Static or DHCPv6. - gateway: String.

    Gateway IPv6 address of the iBMC network port. - prefix_len: Integer.

    IPv6 address prefix length of the iBMC network port.

Examples:

ibmc_ethernet_ipv6 'set' do
  origin 'Static'
  action :set
end

ibmc_ethernet_ipversion

Manage IP version

Actions:

  • set: Set IP version.

    • Properties:
    • version: String. Required.

    Enabled version of IP protocol. Value could be IPv4AndIPv6, IPv4 or IPv6.

Examples:

ibmc_ethernet_ipversion 'set' do
  version 'IPv4AndIPv6'
  action :set
end

ibmc_ethernet_vlan

Manage VLAN network

Actions:

  • set: Set VLAN network.

    • Properties:
    • enabled: true or false.

    Whether VLAN is enabled. - id: Integer.

    VLAN identifier. If VLAN is disabled(set enabled to false), id should not be set.

Examples:

ibmc_ethernet_vlan 'set' do
  enabled true
  id 1111
  action :set
end

ibmc_ethernet

Manage BMC ethernet interface

Actions:

  • get: Get BMC ethernet interface information.

    • Properties:

    None

Examples:

ibmc_ethernet 'get' do
  action :get
end

ibmc_ntp

Manage NTP service

Actions:

  • get: Get NTP service.

    • Properties:

    None

  • set: Set NTP service.

    • Properties:
    • ntp_addr_origin: String.

    NTP mode. Value could be Static, IPv4 or IPv6. - service_enabled: true or false.

    Whether NTP service is enabled. - pre_ntp_server: String.

    Preferred NTP server address. - alt_ntp_server: String.

    Alternative NTP server address. - min_polling_interval: Integer.

    Minimum NTP synchronization interval. Value ranges from 3 to 17. - max_polling_interval: Integer.

    Maximum NTP synchronization interval. Value ranges from 3 to 17. - server_auth_enabled: true or false.

    Whether authentication enabled.

Examples:

ibmc_ntp 'get' do
  action :get
end

ibmc_ntp 'set' do
  ntp_addr_origin 'Static'
  service_enabled true
  pre_ntp_server '10.1.1.3'
  min_polling_interval 6
  max_polling_interval 10
  server_auth_enabled true
  action :set
end

ibmc_boot

Manage OS boot setting

Actions:

  • get: Get OS boot setting.

    • Properties:

    None

  • set_order: Set OS boot order.

    • Properties:
    • seq: Array. Required.

    System boot order. Value should be an array of all boot device. Boot device could be Cd, Pxe, Hdd or Others.

  • set_override: Set OS boot source override.

    • Properties:
    • target: String. Required.

    Boot source override target. Value could be None, Pxe, Floppy, Cd, Hdd or BiosSetup. - enabled: String. Required.

    Boot source override enabled. Value could be Once, Disabled or Continuous. - mode: String. Required.

    Boot source override mode. Value could be Legacy or UEFI.

Examples:

ibmc_boot 'get boot info' do
  action :get
end

ibmc_boot 'set boot order' do
  seq ['Cd', 'Pxe', 'Hdd', 'Others']
  action :set_order
end

ibmc_cpu

Manage OS cpu

Actions:

  • get: Get OS cpu information.

    • Properties:

    None

Examples:

ibmc_cpu 'get' do
  action :get
end

ibmc_drive

Manage physical disk

Actions:

  • get: Get the physical disk information.

    • Properties:

    None

Examples:

ibmc_drive 'get' do
  action :get
end

ibmc_os_eth

Manage OS ethernet interface

Actions:

  • get: Get OS ethernet interface information.

    • Properties:

    None

Examples:

ibmc_os_eth 'get' do
  action :get
end

ibmc_memory

Manage OS memory

Actions:

  • get: Get OS memory information.

    • Properties:

    None

Examples:

ibmc_memory 'get' do
  action :get
end

ibmc_sys_power

Manage OS power

Actions:

  • set: Set OS power.

    • Properties:
    • reset_type: String. Required.

    System power reset type. Value could be On, ForceOff, GracefulShutdown, ForceRestart, Nmi or ForcePowerCycle.

Examples:

ibmc_sys_power 'set' do
  reset_type 'On'
  action :set
end

ibmc_system

Manage product information

Actions:

  • get: Get product information.

    • Properties:

    None

  • set: Set product information.

    • Properties:
    • asset_tag: String.

    Asset tag. - product_alias: String.

    Product alias.

Examples:

ibmc_system 'get' do
  action :get
end

ibmc_system 'set' do
  asset_tag 'chef test'
  action :set
end

ibmc_raid

Manage RAID information

Actions:

  • get: Get RAID information

    • Properties:

    None

Examples:

ibmc_raid 'get' do
  action :get
end

ibmc_network_adapter

Manage network adapter information

Actions:

  • get: Get network adapter information

    • Properties:

    None

Examples:

ibmc_network_adapter 'get' do
  action :get
end

ibmc_os_deploy

Manage OS deployment. Only V5 serial servers support this function. Tips: This function is controlled by iBMC license. It can only be used if the iBMC import the license.

Actions:

  • install: Install OS

    • Properties:
    • file: String. Required.

    Path to SP deployment configuration file. File path must be a local system file path.

Examples:

ibmc_os_deploy 'install' do
  file 'config file path'
  action :install
end

ibmc_restart

Manage BMC power

Actions:

  • restart: Restart BMC.

    • Properties:

    None

Examples:

ibmc_restart 'restart' do
  action :restart
end

ibmc_service

Manage network service

Actions:

  • get: Get network service information.

    • Properties:
    • protocol: String.

    Service protocol. Value could be HTTP, HTTPS, SNMP, VirtualMedia, IPMI, SSH, KVMIP, SSDP or VNC.

  • set: Set netowrk service information.

    • Properties:
    • protocol: String. Required.

    Service protocol. Value could be HTTP, HTTPS, SNMP, VirtualMedia, IPMI, SSH, KVMIP, SSDP or VNC. - state: true or false.

    Whether service enabled. - port: Integer.

    Service port. - notify_ttl: Integer.

    Time for which the SSDP messages are valid. Value range from 1 to 255 - notify_ipv6_scope: String.

    IPv6 multicast range of SSDP messages. Value could be Link, Site or Organization. - notify_multi_cast_interval: Integer.

    SSDP message multicast interval(in seconds).

Examples:

ibmc_service 'get all service' do
  action :get
end

ibmc_service 'set HTTP service' do
  protocol 'HTTP'
  state true
  port 80
  action :set
end

ibmc_smtp

Manage SMTP service

Actions:

  • get: Get SMTP service information.

    • Properties:

    None

  • set: Set SMTP service information.

    • Properties:
    • service_enabled: true or false.

    Whether SMTP service enabled. - server_addr: String.

    SMTP server address. - tls_enabled: true or false.

    Whether SMTP TLS enabled. - anonymous_login_enabled: true or false.

    Whether anonymous login enabled. - sender_addr: String.

    Email sender address. - sender_password: String.

    Email sender password. - sender_username: String.

    Email sender username. - email_subject: String.

    Email subject. - email_subject_contains: Array.

    Email subject keywords. Should be an array of keyword. Keyword could be HostName, BoardSN or ProductAssetTag. - alarm_severity: String.

    Severity level of alarm to be sent. Value could be Critical, Major, Minor or Normal.

Examples:

ibmc_smtp 'get' do
  action :get
end

ibmc_smtp_recipient

Manage SMTP Recipient

Actions:

  • set: Set SMTP Recipient.

    • Properties:
    • index:

    SMTP recipient index, value range: 1 to 4. At most 4 recipient is support. - address: String.

    Address of the recipient receiving alarm email notifications. - desc: String.

    Description of recipient - enabled: true or false.

    Whether this SMTP recipient allowed to receiving alarm email notifications.

Examples:

ibmc_smtp_recipient 'set' do
  index 1
  address 'email address'
  desc 'recipient description'
  enabled true
  action :set
end

ibmc_snmp

Manage SNMP service

Actions:

  • get: Get SNMP service information.

    • Properties:

    None

  • set: Set SNMP service information.

    • Properties:
    • v1_enabled: true or false.

    Whether SNMPv1 enabled. - v2_enabled: true or false.

    Whether SNMPv2 enabled. - long_pass_enabled: true or false.

    Whether long password enabled. - rw_community_enabled: true or false.

    Whether read-write community name enabled. - readonly_community: String.

    Read-only community name. - readwrite_community: String.

    Read-write community name. - v3_auth_protocol: String.

    SNMPv3 authentication algorithm. Value could be MD5 or SHA1 - v3_priv_protocol: String.

    SNMPv3 encryption algorithm. Value could be DES or AES. - service_enabled: true or false.

    Whether trap is enabled. - trap_version: String.

    Trap version. Value could be V1, V2C or V3. - trap_v3_user: String.

    SNMPv3 user name. - trap_mode: String.

    Trap mode. Value could be OID, EventCode or PreciseAlarm. - trap_server_identity: String.

    Host identifier. Value could be BoardSN, ProductAssetTag or HostName. - community_name: String.

    Community name. - alarm_severity, String.

    Severity level of the alarm to be sent. Value could be Critical, Major, Minor or Normal. - trap_server1_enabled: true or false.

    Whether trap server 1 enabled. - trap_server2_enabled: true or false.

    Whether trap server 2 enabled. - trap_server3_enabled: true or false.

    Whether trap server 3 enabled. - trap_server4_enabled: true or false.

    Whether trap server 4 enabled. - trap_server1_address: String.

    Trap server 1 address. - trap_server2_address: String.

    Trap server 2 address. - trap_server3_address: String.

    Trap server 3 address. - trap_server4_address: String.

    Trap server 4 address. - trap_server1_port: Integer.

    Trap server 1 port. - trap_server2_port: Integer.

    Trap server 2 port. - trap_server3_port: Integer.

    Trap server 3 port. - trap_server4_port: Integer.

    Trap server 4 port.

Examples:

ibmc_snmp 'get' do
  action :get
end

ibmc_sp

Manage SP service. Only V5 servers used with BIOS version later than 0.39 support this function.

Actions:

  • set: set SP service.

    • Properties:
    • start_enabled: Boolean.

    Whether SP start is enabled. - sys_restart_delay_seconds: Integer.

    Maximum time allowed for the restart of the OS. - timeout: Integer.

    Maximum time allowed for SP deployment, value range is 300 to 86400. - finished: Boolean.

    Status of the transaction deployed.

  • result: Get SP result.

    • Properties:

    None

Examples:

ibmc_sp 'set' do
  start_enabled true
  sys_restart_delay_seconds 3600
  timeout 10800
  finished true
  action :set
end


ibmc_sp 'get sp result' do
  action :result
end

ibmc_sp_firmware

Manage SP firmware. Only V5 servers used with BIOS version later than 0.39 support this function.

Actions:

  • get: Get SP service information.

    • Properties:

    None

  • upgrade: Upgrade SP service.

    • Properties:
    • image_uri: String. Required.

    File URI of firmware update image file. The firmware upgrade file is in .ISO format. support only the CIFS and NFS protocols. The URI cannot contain the following special characters: ||, ;, &&, $, |, >>, >, <.

    For examples: - remote path: nfs://username:password@hostname/directory/Firmware.ISO - parameter: String. Required.

    all indicates the entire upgrade package or a specific upgrade package. - mode: String. Required.

    Mode of the upgrade. Value could be Auto, Full, Recover, APP or Driver. - active_method: String. Required.

    Only supports OSRestart for now.

Examples:

ibmc_sp_firmware 'get' do
  action :get
end

ibmc_sp_firmware `upgrade` do
  image_uri 'image_uri'
  parameter 'all'
  active_method 'OSRestart'
  mode 'Auto'
  action :upgrade
end

ibmc_user

Manage BMC user

Actions:

  • get: Get BMC user.

    • Properties:

    None

  • add: Add BMC user.

    • Properties:
    • username: String. Required.

    BMC user name. - password: String. Required.

    BMC user password. A string of up to 20 characters. If password complexity check is enabled for other interfaces, the password must meet password complexity requirements. If password complexity check is not enabled for other interfaces, there is not restriction on the password. - role: String. Required.

    BMC user role. Value could be Administrator, Operator, Commonuser, NoAccess, CustomRole1, CustomRole2, CustomRole3 or CustomRole4.

  • delete: Delete BMC user.

    • Properties:
    • username: String. Required.

    BMC user name.

  • set: Set BMC user.

    • Properties:
    • username: String. Required.

    BMC user name. - new_username: String.

    BMC new user name. - new_password: String.

    BMC new user password. - new_role: String.

    BMC new user role. Value could be Administrator, Operator, Commonuser, NoAccess, CustomRole1, CustomRole2, CustomRole3 or CustomRole4. - locked: true or false. Default false.

    Whether the user is locked. - enabled: true or false

    Whether the user enabled.

Examples:

ibmc_user 'add user' do
  username 'test'
  password 'pass'
  role 'Commonuser'
  action :add
end

ibmc_user 'update user' do
  username 'test'
  new_username 'new_name'
  action :set
end

ibmc_user 'delete user' do
  username 'new_name'
  action :delete
end

ibmc_vmm

Manage virtual media

Actions:

  • connect: Connect virtual media.

    • Properties:
    • image: String. Required.

    URI of the virtual media image.
    Only the URI connections using the Network File System (NFS), Common Internet File System (CIFS) or HTTPS protocols are supported.

  • disconnect: Disconnect virtual media.

Examples:

ibmc_vmm 'connect' do
  image 'image URI'
  action :connect
end

ibmc_vmm 'disconnect' do
  action :disconnect
end

Dependent cookbooks

This cookbook has no specified dependencies.

Contingent cookbooks

There are no cookbooks that are contingent upon this one.

1.0.0

Initial release. Add Chef resources to config HUAWEI iBMC using iBMC REST API.

Collaborator Number Metric
            

1.1.0 passed this metric

Contributing File Metric
            

1.1.0 failed this metric

Failure: To pass this metric, your cookbook metadata must include a source url, the source url must be in the form of https://github.com/user/repo, and your repo must contain a CONTRIBUTING.md file

Foodcritic Metric
            

1.1.0 failed this metric

FC085: Resource using new_resource.updated_by_last_action to converge resource: chef-ibmc-cookbook/libraries/base_resource.rb:110
Run with Foodcritic Version 14.3.0 with tags metadata,correctness ~FC031 ~FC045 and failure tags any

No Binaries Metric
            

1.1.0 failed this metric

Failure: Cookbook should not contain binaries. Found:
chef-ibmc-cookbook/files/default/uREST.tar.gz

Publish Metric
            

1.1.0 passed this metric

Supported Platforms Metric
            

1.1.0 passed this metric

Testing File Metric
            

1.1.0 failed this metric

Failure: To pass this metric, your cookbook metadata must include a source url, the source url must be in the form of https://github.com/user/repo, and your repo must contain a TESTING.md file

Version Tag Metric
            

1.1.0 failed this metric

Failure: To pass this metric, your cookbook metadata must include a source url, the source url must be in the form of https://github.com/user/repo, and your repo must include a tag that matches this cookbook version number